MANUAL LIFT PULLER HAND WINCHES LIFTING HANDLE WIRE ROPE PULLING HOIST
Product introduction
1. Wire rope pulling hoist is a new type of high-efficiency, safe and durable lifting machinery with three functions of lifting, pulling and tensioning.
2.The structure of the whole machine is reasonable in design，with safety self-locking device, high in safety factor and long in service life.
3. The casing is made of aluminum alloy, which is light and easy to carry and use.
4. The main rated lifting capacity is 8KN, 16KN, 32KN and 54KN. Standard lifting height is 20 m. Applicatoin It is suitable for long distance lifting or pulling in the field without power source.
5. The length of wire rope can be customized according to needs.
WIRE ROPE PULLING HOIST TECHNICAL PARAMETERS
|
Item number |
14183 |
14184 |
14185 |
14186 |
|
Model |
HSS408 |
HSS416 |
HSS432 |
ISS454 |
|
Rated Lifting/Pulling (KN) |
8/12.5 |
16/25 |
32/50 |
54 |
|
Once journey (mm) |
≥40 |
≥40 |
≥16 |
≥20 |
|
Diameter of steel rop (mm) |
Φ8 |
Φ11.6 |
Φ16 |
Φ22 |
|
Standard length of steel rope(m) |
20 |
20 |
20 |
20 |
|
Net weight (kg) |
6.8 |
13 |
25 |
52 |
|
Hand wrenching at the rate load (N) |
≤343 |
≤400 |
≤441 |
≤550 |
|
Encasement dimension (mm) |
420x106x250 |
530x126x315 |
660x160x360 |
930x390x150 |
Related products
-
ACSR SPLICING SLEEVE PROTECTOR SPLICE PROTECTIO...
Product introduction Splicing protection sleeve is apply to protecting conductor pressure crimping tube on ACSR paying off and make it avoid torsion when pass through pulleys. Splicing protection sleeve is composed of two half steel pipes and four rubber heads. It is used to protect the crimping pipe and prevent the crimping tube from directly contacting the pulley and bending during paying off. The splicing protection sleeve must be selected according to the conduc...
-
Wire Rope Cable Sleeve Connector GROUND WIRE OP...
Product introduction The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire. Apply to ADSS or OPGW cable Ground wire contruction. As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip. Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diamete...
-
COME ALONG CLAMP ALUMINUM ALLOY CONDUCTOR WIRE ...
Product introduction 1. The body of multi-segment type gripper is forging of high strength aluminum alloy with light weight and no damage to conductor. 2. Use multi-segment type bolts clamp structure, so the traction load is large. Not to slip line and hurt the line. Need to specify when ordering diameter and conductor models. The groove for wire clamping shall be processed according to the wire diameter. Select the number of slice that make up the product according...
-
Traction Anti Twist Wire Rope Cable Joints Conn...
Product introduction Anti-twist Fixed Joint is applicable to the connection of wire rope, anti twist wire rope, Dinima rope, DuPont wire rope and other traction ropes. The minimum traction load is 10KN, and the maximum traction load is 25KN. The anti-twist fixed joint is made of 40 chrome alloy steel. 1. High strength, small size, light weight, and good looking. 2. It smoothly can pass through the corners, pulley, tension machine, traction machine and other equipmen...
-
ALUMINUM ALLOY GRIPPER INSULATED CONDUCTOR Come...
Product introduction Aluminum Alloy Insulated Conductor Grippers（come along clamp） are a commonly used wire holding tool in the construction and maintenance of electric power, telecommunications and railway electrification overhead lines. The grippers（come along clamp） is applicable to adjust sag and tension insulated conductor during stringing. The grippers（come along clamp） is forged from high-strength aluminum alloy, with small volume and light weight. All g...
-
CONDUCTOR EARTH STRINGING BLOCK GROUNDING EARTH...
Product introduction The grounding earthing pulley is applicable to eliminate induced staticelectricity in conductor or grounding wire spread when tensioning erect wires . Notes : The grounding wire shall be configured separately. 1.Toeliminate induce electricity in conductor and grounding wire when releasingwires. 2.Mountedon the outlet side of tensioners or the inlet side of puller, and drawn by twostay grounding wires. 3.Tri-sheave mechanism ,compacted automatica...