Brake Frame Wire Rope Reel Stand
Product introduction
It has good stability. Simple structure, convenient for handling. The site has good adaptability and is convenient for field construction.
Equipped with brake, it is convenient to brake at any time when the anti twist wire rope drum rotates.
Anti twist wire rope reel stand is applicable to be as the support of Anti twist wire rope reel in laying Anti twist wire rope.Used for recovering and releasing Anti twist wire rope.
STEEL WIRE ROPE REEL STAND TECHNICAL PARAMETERS
|
Item number |
Model |
Reel Stand Dimension(MM) |
Weight(KG) |
||
|
Reel |
Stand |
Reel |
Stand |
||
|
07125A |
07128A |
950 |
Φ950xΦ400x450 |
48 |
20 |
|
07125B |
07128B |
1200 |
Φ1200xΦ570x560 |
65 |
30 |
|
07125C |
07128C |
1400 |
Φ1400xΦ570x560 |
74 |
40 |
|
07125D |
07128D |
1600 |
Φ1600xΦ570x560 |
102 |
50 |
|
07125E |
07128E |
1900 |
Φ1900xΦ570x560 |
119 |
70 |
Related products
-
508mm Wheels Sheaves Bundled Wire Conductor Pul...
Product introduction This 508*75mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ508 × Φ408 × 75 (mm). Under normal circumstances，its maximum suitable conductor is ACSR400, which means that the aluminum of our conducting wire has the maximum cross section of 400 square millimeters. The maximum diameter through which the sheave passes is 55mm. Under normal circumstances, the model of the maximum...
-
Conductor Pulley Block Stringing Pulley Groundi...
Product introduction The Stringing Pulley With Grounding Roller is used to release the induced current on the line during the setting out construction. The conductor is located between the grounding pulley and the main pulley. The conductor is in contact with the grounding pulley, and the induced current on the conductor is released through the grounding wire connected with the grounding pulley. Avoid accidental electric shock of construction personnel. The Stringing...
-
Independent Conductor Overturn Prevention Balan...
Product introduction Traction Guidance Head Boards for Four Bundle Conductors are designed to avoid torsion strain accumulation during line stringing. Traction Guidance Head Boards are using with the Swivel Joint, traction guidance and anti overturning. Traction Guidance Head Boards are apply to tension stringing or mechanical traction stringing construc. The structure of the independent conductor type head boards for four bundle conductors is simple. The conductor ...
-
Manual Ratchet Tightener Insulating Ribbon Insu...
Product introduction The Insulated tightener uses non-conductive FRP insulated handle and soft corrosion-resistant and high tension woven belt to replace the steel wire rope. It is used for wire tightening during live line operation, and the voltage resistance is 15 kV (3 minutes) 1.The handle is made of glass fiber reinforced plastic insulation resin, with a withstand voltage of more than 15KV. It can be used for wire tightening, traction and lifting in live workin...
-
Wire Rope Pulling Cable traction net sleeve Cab...
Product introduction As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip. The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire. Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diameter, traction load and use environment. When paying off ...
-
Wire Rope ACSR Steel Strand Ratchet Cutting Too...
Product introduction The Manual Telescopic conduct Cutter is used to cut off various Wire rope or ACSR and steel strand. 1.The model of cutting machine shall be determined according to the cable material and cable outer diameter. See the cutting range in the parameter table for details. 2.Because of its light weight, it is easy to carry. It can even be operated with only one hand. 3.The cutter has convenient operation, is labor saving and safe and can not damage con...