ACSR steel strand Ratchet Cutting Tools Manual Ratchet conductor Cutter
Product introduction
The conductor cutter is used to cut off various conductor and steel strand.
1.Cutting the ACSR or steel strand. Type selection shall be based on outer diameter. See the cutting range in the parameter table for details.
2.Because of its light weight, it is easy to carry. It can even be operated with only one hand.
3.The conductor cutter has convenient operation, is labor saving and safe and can not damage conductor and human bodies.
4.Ratchet feed structure and lengthened handle are adopted, with large cutting force and fast cutting speed.
5.The blades are manufactured from high strength special steel, heat treated to ensure a long service life.
6.No cutting of Steel rod, wire rope, armoured cable, copper-aluminium cable is allowed. Do not exceed the shear range.
Ratchet conductor Cutter TECHNICAL PARAMETERS
|
Item number |
Model |
Cutting Range |
|
16241 |
SU-J |
Cutting ACSR with section below 400mm². Cutting steel strand with section below 80 mm². |
|
16242 |
SUA-J |
Cutting ACSR with section below720mm². Cutting steel strand with section below 120mm². |
|
16243 |
SUB-J |
Cutting ACSR with section below1000mm². Cutting steel strand with section below 150mm². |
|
16244 |
SUC-J |
Cutting ACSR with section below1450mm². Cutting steel strand with section below 180mm². |
Related products
-
Rubber Latex Insulation Boots Shoes Safety Insu...
Product introduction Insulating gloves, also known as high-voltage insulating gloves, are five fingered gloves made of natural rubber and formed by pressing, molding, vulcanizing or immersion molding with insulating rubber or latex. They are mainly used for live working of electricians. The voltage grade of insulating gloves can generally be divided into 5KV, 10KV, 12KV, 20KV, 25KV and 35KV. Insulating boots are also called high-voltage insulating boots. Good insula...
-
Lifting Traction Connecting Ring High Strength ...
Product introduction The shackle is suitable for lifting, towing, anchoring, tightening and other connections. The shackle is made of 40 chrome alloy steel. The safety factor is more than 3 times. D-type shackle is a special shackle for electric power construction,with small volume and light weight, large bearing weight and high safety factor. shackle TECHNICAL PARAMETERS Item number Model Rated Load (KN) Main Size (mm) Weight (kg) ...
-
Digital Wireless Pull Force Digital Tension Dyn...
Product introduction Digital Tension Dynamometer is a mechanical measuring instrument used for tension test. The Digital Tension Dynamometer is applicable to the measurement of traction and lifting load. Make sure that the traction and lifting load does not exceed the allowable load. The measurement unit of the Digital Tension Dynamometer can be switched between kg, lb and N. Digital Tension Dynamometer has the function of measuring peak value and keeping records. Ov...
-
Traction Anti Twist Wire Rope Cable Joints Conn...
Product introduction Anti-twist Fixed Joint is applicable to the connection of wire rope, anti twist wire rope, Dinima rope, DuPont wire rope and other traction ropes. The minimum traction load is 10KN, and the maximum traction load is 25KN. The anti-twist fixed joint is made of 40 chrome alloy steel. 1. High strength, small size, light weight, and good looking. 2. It smoothly can pass through the corners, pulley, tension machine, traction machine and other equipmen...
-
Stringing Block Special Block press rising wire...
Product introduction When paying off in high mountains and mountains, the height difference between iron towers is large, so it is very easy for the traction rope, conductor or ground wire to slip out of the paying off pulley groove when it is rised. The pressing pulley is mainly used to press the rising traction rope, conductor or ground wire during paying off. When it is applicable to wire rope or steel strand, the pulley is made of steel wheel. When applicable to...
-
TRIANGULAR SECTION HORIZONTAL PLATFORM STRUCTUR...
Product introduction The hanging ladder can be used for corner tower hanging operations, etc. When hanging a ladder horizontally, one end of the ladder is hung on the cross arm angle iron, and the other end of the ladder is hung on the wire. Hanging ladders can also be used vertically. Item No [L] [A] [B] [B1] [C] [D] m mm mm mm mm mm 22251 1.5 220 900 100 320 320 22252 2.5 220 900 100 320 320 22253 3 220 900 100 320 320 22255 10 220 ...