PORTABLE MODEL HYDRAULIC COPPER ALUMINUM BUS-BAR CUTTER
Product introduction
Portable Model Hydraulic Bus Bar Cutter is formed by high strength alloy steel precision.It is high efficacy due to smooth fracture surface and neat without burrs. Portable Model Hydraulic Bus Bar Cutter only takes a few seconds to cut off the Angle. Portable Model Hydraulic Bus Bar Cutter is mainly used in the iron tower factory, cutting off in transmission and distribution engineering construction site. Portable Model Hydraulic Bus Bar Cutter is used to cut off the copper and aluminum platoon and steel plate. The hydraulic pump needs to be matched.
Select the type according to the Bus-bar specification.
Manual hydraulic pump or charging hydraulic pump can be configured in the places without electric field, and electric hydraulic pump can be equipped in the places with electric field.
HYDRAULIC BUS-BAR CUTTER TECHNICAL PARAMETERS
|
Item number |
06242-1 |
06242-1A |
06242-1B |
|
Model |
CWC-150 |
CWC-200 |
CWC-300 |
|
Cutting force |
200KN |
300KN |
1000KN |
|
Max thickness of sheet |
CU/AL plate 10mm |
CU/AL plate 12mm |
CU/AL plate 16mm /steel plate 12mm |
|
Width of sheet |
CU/AL plate 150mm |
CU/AL plate 200mm |
CU/AL plate 300mm |
|
Size |
270*150*410mm |
320*150*420mm |
525*230*590mm |
|
Weight(KG) |
N.W30KG G.W33KG |
N.W37KG G.W40KG |
N.W109KG G.W120KG |
|
Package |
wooden case |
wooden case |
wooden case |
Related products
-
Manual Foot Electric HIGH PRESSURE HYDRAULIC PUMP
Product introduction Hydraulic pump range: manual hydraulic pump and electric hydraulic pump. Both manual pump and electric pump adopt：The output pressure of the hydraulic pump can reach 70MPa. High and low speed two stage design is for quick oil output. Electric hydraulic pump equipped withOver pressure safety valve unit could avoid over pressure damage. Double speed high performance pumps, built in pressure overflow valve, can ensure the maximum flow when maximu...
-
HYDRAULIC HOLE PUNCH Cu/Al Busbar Iron Plate Hy...
Product introduction Model CH-60 CH70 CH80 CH100 Hydraulic Punching Tools works with an external hydraulic pump (Hand or Foot or Electric pump). It is designed to punch round holes on Cu/Al Busbar or Iron plate, angle iron, channel steel, etc. With hydraulic power, sharp punching dies can easy fast and clean punching can be achieved. Operation speed of Hydraulic Hole Puncher is fast than electric drill. It only need a few seconds for punching and there is no burr a...
-
ACSR Steel Strand Armored Cable INTEGRAL MANUAL...
Product introduction 1.Hand operated hydraulic cable cutter specifically designed to cut copper, aluminium and tel cables having a max overall diameter less than 85 mm. 2.The model of cutting machine shall be determined according to the cable material and cable outer diameter. See the cutting range in the parameter table for details. 3.Because of its light weight, it is easy to carry. It can even be operated with only one hand. 4.The tool features a double speed act...
-
TRANSMISSION LINE TOOLS INTEGRAL MANUAL HYDRAUL...
Product introduction 1.Hand operated hydraulic cutter specifically designed to cut copper, aluminium tel cables, ACSR, steel strand and having a max overall diameter from 40 to 85mm. 2.The tool features a double speed action: a fast advancing speed for rapid approach of the blades to the cable and a slower more powerful speed for cutting. 3.The blades are manufactured from high strength special steel, heat treated to ensure a long service life. 4.The head can b...
-
MULTIFUNCTIONAL COPPER GENERATRIX HYDRAULIC BUS...
Product introduction Multi-function Bus-bar Processing: Cutting, Punching, Bending(horizontal and vertical), Crimping and Embossing, etc. Select the type according to the Bus-bar specification and bus processing requirements. It has the following functions: With three functions, cutting, punching and bending. With four functions, cutting, punching, bending and crimping. With four functions,cutting, punching and bending(horizontal and vertical). Other functions, such...
-
Thin Iron Plate Punching Reserved Hole Punching...
Product introduction Hydraulic Punching Machine is suitable for punching thin iron plates that have been integrally formed, such as switch box panels, the surfaceof the paint will not be damaged after the perforation. The standard mold is round hole mold. The punching plate is 3.5mm thick. Punchable round hole, elliptical hole, square hole, etc. The mold size can be customized according to the requirements of the user. HYDRAULIC PUNCHING TOOLS TECHNICAL PAR...