Traction Anti Twist Wire Rope Cable Joints Connector Anti-twist Fixed Joint
Product introduction
Anti-twist Fixed Joint is applicable to the connection of wire rope, anti twist wire rope, Dinima rope, DuPont wire rope and other traction ropes. The minimum traction load is 10KN, and the maximum traction load is 25KN.
The anti-twist fixed joint is made of 40 chrome alloy steel.
1. High strength, small size, light weight, and good looking.
2. It smoothly can pass through the corners, pulley, tension machine, traction machine and other equipments.
Anti-twist Fixed Joint TECHNICAL PARAMETERS
|
Item number |
Model |
Rated Load (KN) |
Main Size(mm) |
Weight （mm） |
|||||
|
|
|
|
A |
B |
C |
d |
D |
E |
|
|
17111 |
SLU-1 |
10 |
36 |
68 |
18 |
10 |
14 |
29 |
0.2 |
|
17112 |
SLU-3 |
30 |
37 |
76 |
20 |
12 |
17 |
31 |
0.22 |
|
17113 |
SLU-5 |
50 |
50 |
96 |
21 |
18 |
19 |
42 |
0.6 |
|
17114 |
SLU-8 |
80 |
56 |
96 |
23 |
18 |
19 |
42 |
0.6 |
|
17115 |
SLU-10 |
100 |
59 |
126 |
30 |
22 |
26 |
54 |
1.2 |
|
17116 |
SLU-13 |
130 |
61 |
134 |
32 |
24 |
27 |
56 |
1.3 |
|
17117 |
SLU-15 |
150 |
63 |
138 |
37 |
27 |
28 |
58 |
1.4 |
|
17117A |
SLU-18 |
180 |
63 |
138 |
37 |
27 |
28 |
58 |
1.4 |
|
17118 |
SLU-25 |
250 |
80 |
178 |
44 |
30 |
35 |
72 |
3.0 |
|
17118A |
SLU-28 |
280 |
80 |
178 |
44 |
30 |
35 |
72 |
3.0 |
|
17119 |
SLU32 |
320 |
85 |
186 |
42 |
30 |
38 |
80 |
3.9 |
Related products
-
DUAL-SHEAVE ALUMINUM STEEL BOTH SIDE OPENING HO...
Product introduction Both side opening hoisting tackle is suitable for assemble and erect the tower,line construction,hoist devices and other hoist operation. The hoisting tackle group formed by the combination of hoisting tackle can change the direction of the traction wire rope of the hoisting tackle and the hoisting tackle group and lift or move objects for many times. Product is made of both side opening steel side plate with steel wheel. The wheel has good wear...
-
508mm Wheels Sheaves Bundled Wire Conductor Pul...
Product introduction This 508*75mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ508 × Φ408 × 75 (mm). Under normal circumstances，its maximum suitable conductor is ACSR400, which means that the aluminum of our conducting wire has the maximum cross section of 400 square millimeters. The maximum diameter through which the sheave passes is 55mm. Under normal circumstances, the model of the maximum...
-
TRACTION LIFTING REVOLVE ANCHORING TEMPORARILY ...
Product introduction The rotary anchor is applied to fixing and fastening the winches, conductor pullers, conductor tensioners, conductor tractions，blocks and temporary pulling ropes in line construction. The rotary anchor is of welded structure of welding of round steel and spiral blade with corrosion-resistant primer on its surface, and it is durable in its quality. Bury the rotary anchor rotary drilling into the ground under the ground in appropriate depth and ma...
-
Wire Laying Steel Cable Socks Mesh Sleeve Net O...
Product introduction The OPGW Mesh Socks Joint is used to hold the traction OPGW tightly. As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip. The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire. Different materials, wires with different diameters and different weaving methods can be customized according to the OPG...
-
Hydraulic Traction Conductor Stringing Equipmen...
Product introduction The Hydraulic Traction is used for the traction of various conductors, ground wires, OPGW and ADSS during tension setting out. Infinitely variable speed and pull force control ,the pull in the rope can be read on the line pull gauge . The max pull for conductor–stringing operation can preset ,automatic overload protection system . Spring applied –hydraulic release brake acts automatically in case of hydraulic failure ensure to safety . With hydra...
-
ACSR Steel Strand Armored Cable INTEGRAL MANUAL...
Product introduction 1.Hand operated hydraulic cable cutter specifically designed to cut copper, aluminium and tel cables having a max overall diameter less than 85 mm. 2.The model of cutting machine shall be determined according to the cable material and cable outer diameter. See the cutting range in the parameter table for details. 3.Because of its light weight, it is easy to carry. It can even be operated with only one hand. 4.The tool features a double speed act...