STEEL STRAND SPLICING SLEEVE PROTECTOR Protective SPLICE PROTECTION SLEEVES
Product introduction
Splicing protection sleeve is apply to protecting ground wire pressure crimping tube on steel strand paying off and make it avoid torsion when pass through pulleys.
Splicing protection sleeve is composed of two half steel pipes and four rubber heads. It is used to protect the crimping pipe and prevent the crimping tube from directly contacting the pulley and bending during paying off.
The splicing protection sleeve must be selected according to the steel strand specification (crimping tube specification), and correspond one by one. If the size of crimp tube is different from the standard, the dimension of splicing protection sleeve or crimping tube should be indicated in the contract.
ground wire SPLICE PROTECTION SLEEVES TECHNICAL PARAMETERS
|
Item number |
Model |
Main size(MM) |
Application ground wire |
|||
|
|
|
D |
L |
d |
L1 |
|
|
17213 |
J55G |
Φ30 |
450 |
Φ24 |
280 |
GJ50,GJ55 |
|
17214 |
J70G |
Φ30 |
510 |
Φ24 |
340 |
JLB65,GJ70 |
|
17215 |
J80G |
Φ34 |
510 |
Φ27 |
340 |
GJ80 |
|
17216 |
J95G |
Φ34 |
585 |
Φ27 |
415 |
JLB95 |
|
17217 |
J100G |
Φ38 |
590 |
Φ28 |
390 |
LGJ50/30,LGJ100 |
|
17218 |
J120G |
Φ40 |
660 |
Φ30 |
440 |
GJ120,JLB120 |
|
17219 |
J150G |
Φ45 |
850 |
Φ37 |
530 |
GJ150,LGJ70/40, LGJ95/55 |
Related products
-
Wire Rope Cable Sleeve Connector GROUND WIRE OP...
Product introduction The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire. Apply to ADSS or OPGW cable Ground wire contruction. As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip. Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diamete...
-
TRANSMISSION LINE TOOLS INTEGRAL MANUAL HYDRAUL...
Product introduction 1.Hand operated hydraulic cutter specifically designed to cut copper, aluminium tel cables, ACSR, steel strand and having a max overall diameter from 40 to 85mm. 2.The tool features a double speed action: a fast advancing speed for rapid approach of the blades to the cable and a slower more powerful speed for cutting. 3.The blades are manufactured from high strength special steel, heat treated to ensure a long service life. 4.The head can b...
-
Stringing Construction Bundled Conductor Aerial...
Product introduction In the harsh environment such as mountains, valleys and rivers, it is not convenient to manually lay the guide rope on the ground, the helicopter can be used to pull the guide rope and directly hang it in the pulley groove of the Aerial Helicopter Stringing Pulley. Convenient for subsequent wire laying. The guide rope enters the pulley groove through the guide rope guide arm, eccentric rotating door and other mechanisms in the Aerial Helicopter S...
-
Lifting Pole Frame Aluminum Alloy Holding Inter...
Product introduction During used for transmission and distribution line engineering, The Internal Suspended Aluminum Alloy Holding Pole is used for internal suspension lifting of iron tower. Adopt single-arm style, free from direction restriction, use convenience. The main material adopts right angle aluminum alloy section, rivet joint makes, portable and durable. According to the height of the lifting power tower and the lifting load weight, the internal suspended a...
-
Braided Dinima DuPont Silk Nylon Synthetic Fibe...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the ...
-
ACSR Steel Strand CHAIN TYPE Cutting Tools Manu...
Product introduction The conductor cutter is used to cut off various conductor and steel strand. The maximum cut conductor diameter is 35 mm. 1.Cutting the ACSR or steel strand. Type selection shall be based on outer diameter. See the cutting range in the parameter table for details. 2.Because of its light weight, it is easy to carry. It can even be operated with only one hand. 3.The conductor cutter has convenient operation, is labor saving and safe and can not dam...