ACSR Steel Strand Armored Cable INTEGRAL MANUAL HYDRAULIC CABLE CUTTER

Short Description:

Hand operated hydraulic cable cutter specifically designed to cut copper, aluminium and tel cables having a max overall diameter less than 85 mm.


Product Detail

Product Tags

Product introduction 

1.Hand operated hydraulic cable cutter specifically designed to cut copper, aluminium and tel cables having a max overall diameter less than 85 mm.

2.The model of cutting machine shall be determined according to the cable material and cable outer diameter. See the cutting range in the parameter table for details.

3.Because of its light weight, it is easy to carry. It can even be operated with only one hand.

4.The tool features a double speed action: a fast advancing speed for rapid approach of the blades to the cable     and a slower more powerful speed for cutting.

5.The blades are manufactured from high strength special steel, heat treated to ensure a long service life.

6.The head can be easily opened to allow the cutting cables.

HYDRAULIC CABLE CUTTER TECHNICAL PARAMETERS

Item number

21447A

21447B

21447C

21447D

21447E

21447F

Model

CC-50A

CPC-50A

HT-50A

CPC-40FR

CPC-50FR

CPC-85FR

Crimping

force

100KN

80KN

70KN

70KN

80KN

80KN

Cutting

Range(Max

CU/AL

cable Φ50mm

steel rope

cable Φ18mm

steel rope

cable Φ15mm

steel rope

cable Φ18mm

steel rope

cable Φ18mm

armored CU/AL

cable Φ85mm

ACSR

cable Φ50mm

steel

strand Φ10mm

ACSR

cable Φ40mm

ACSR

cable Φ50mm

armored CU/AL

cable Φ50mm

ACSR

cable Φ50mm

armored CU/AL

cable Φ40mm

armored CU/AL

cable Φ50mm

steel

strand Φ16mm

armored CU/AL

cable Φ50mm

steel

strand Φ16mm

steel

strand Φ16mm max

Stroke

50mm

50mm

40mm

40mm

50mm

85mm

Length

620mm

620mm

660mm

700mm

710mm

820mm

Weight

N.W6.1KG

G.W9.1KG

N.W6.2KG

G.W9.2KG

N.W6.5KG

G.W8.9KG

N.W6KG

G.W9KG

N.W7KG

G.W10KG

N.W9.5KG

G.W13KG

Package

plastic box

plastic box

plastic box

plastic box

plastic box

steel case


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Independent Conductor Overturn Prevention Balanced Pulley Traction Guidance Head Boards

      Independent Conductor Overturn Prevention Balan...

      Product introduction  Traction Guidance Head Boards for Two Bundle Conductors are designed to avoid torsion strain accumulation during line stringing. Traction Guidance Head Boards is using with the Swivel Joint, traction guidance and anti overturning. Traction Guidance Head Boards is apply to tension stringing or mechanical traction stringing construc. The structure of the independent conductor type head boards for two bundle conductors is simple. The conductor bala...

    • 1160mm Wheels Sheaves Bundled Wire Conductor Pulley Stringing Block

      1160mm Wheels Sheaves Bundled Wire Conductor Pu...

      Product introduction  This 1160mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ1160 × Φ1000 × 150 (mm). Under normal circumstances,its maximum suitable conductor is ACSR1250, which means that the aluminum of our conducting wire has the maximum cross section of 1250 square millimeters. The maximum diameter through which the sheave passes is125mm. Under normal circumstances, the model of the maxi...

    • STEEL STRAND SPLICING SLEEVE PROTECTOR Protective SPLICE PROTECTION SLEEVES

      STEEL STRAND SPLICING SLEEVE PROTECTOR Protecti...

      Product introduction  Splicing protection sleeve is apply to protecting ground wire pressure crimping tube on steel strand paying off and make it avoid torsion when pass through pulleys. Splicing protection sleeve is composed of two half steel pipes and four rubber heads. It is used to protect the crimping pipe and prevent the crimping tube from directly contacting the pulley and bending during paying off. The splicing protection sleeve must be selected according to ...

    • Self Propelled Towing Machine Self-Moving Traction Machine

      Self Propelled Towing Machine Self-Moving Tract...

      Product introduction Self-Moving Traction Machine is suitable for line change project to spread OPGW, replace old conductor. Self-Moving Traction Machine and Stringing Blocks Recovery Damper are used together. Features Use gasoline Remote control operation Use to spread OPGW,replace old conductor. Self-Moving Traction Machine TECHNICAL PARAMETERS Item No. 20121 Model ZZC350 Block passed diameter range(mm) φ9~φ13 Maximum creeping angle(°) 31 ...

    • Earthing Equipment Portable Earth Wire Personal Safety Grounding Wire

      Earthing Equipment Portable Earth Wire Personal...

      Product introduction  Personal safety grounding wire is an auxiliary protection measure to prevent workers from being shocked by induced electricity when working on power cut lines, and to prevent accidental power intrusion when working on power distribution networks, so as to protect the personal safety of workers. It is suitable for indoor or outdoor rain free weather, and is suitable for various voltage levels, but the security wire must not replace the electrical...

    • INSULATION Semiconductor Layer Insulating layer Stripping CABLE STRIPPER

      INSULATION Semiconductor Layer Insulating layer...

      Product introduction  Adjustable insulation cable layer stripper, insulated wire stripper is used to strip the layer insulation of the insulated cable. Knife-edge can be fine-tuned to overcome the thickness of the nonuniform outer layer of insulation, and not to hurt copper and aluminum line.It is made by high strength aluminum alloy. The stripping range is 30mm, 40mm, 65mm, 105mm and 160mm in diameter. Model selection shall be based on the outer diameter of the cabl...