HYDRAULIC TENSIONING STRINGING EQUIPMENT OVERHEAD LINE
Product introduction
The Hydraulic tensioning equipment is used for the tensioning of various conductors, ground wires, OPGW and ADSS during tension setting out.
Bull wheel with wear proof MC nylon lining segments.
Infinitely variable tension control and constant tension conductor stringing.
Spring applied hydraulic released brake acts automatically in case of hydraulic failure to ensu safety
Attached two sets of hydraulic power output interface to connect hydraulic conductor reel stand.
Hydraulic tensioning with various traction loads ranging from 7.5KN tons to 4*50KN have a complete range.
Engine : DEUTZ air-cooled diesel engine.
Main variable pump and main motor :Rexroth (BOSCH)
Reducer :Rexroth (BOSCH)
Main hydraulic valve : Rexroth (BOSCH)
Hydraulic TENSIONING TECHNICAL PARAMETERS
|
Item number |
07212 |
07155 |
07171 |
07181 |
07192 |
07197 |
|
Model |
SA-YZM7.5 |
SA-YZ30A |
SA-YZ40A |
SA-YZ2x35 |
SA-YZ2x40B |
SA-YZ2x55 |
|
Maximum Tension(KN) |
7.5 |
30 |
40 |
2x35/1x70 |
2x40/1x80 |
2x55/1x110 |
|
Continuous Tension(KN) |
7.5 |
25 |
35 |
2x30/1x60 |
2x35/1x70 |
2x50/1x100 |
|
Maximum speed(Km/h) |
40m/min |
5 |
5 |
5 |
5 |
5 |
|
Bottom of groovr diamere(mm) |
Φ1100 |
Φ1200 |
Φ1200 |
Φ1200 |
Φ1500 |
Φ1600 |
|
Number of groovr |
/ |
5 |
5 |
2x5 |
2x5 |
2x5 |
|
Maximum pull-back(KN) |
/ |
20 |
40 |
2x30/1X60 |
2x40/1X80 |
2x50/1X100 |
|
Maximum speed back (Km/h) |
/ |
/ |
3 |
2x2.1 |
2x1.5 |
2x2.1 |
|
Maximum suitable conductor diameter(mm) |
/ |
Φ32 |
Φ32 |
Φ32 |
Φ40 |
Φ42.5 |
|
Engine power/speed (KW/RPM) |
/ |
11/2200 |
37/2800 |
51/2500 |
51/2500 |
54/2500 |
|
Dimensions(m) |
2.3x1.2x1.6 |
3.6x1.8x2.4 |
3.4x1.8x2.4 |
4.4x2.1x2.6 |
4.5x2.2x2.8 |
5.0x2.3x2.7 |
|
Weight(kg) |
450 |
1700 |
2800 |
4000 |
4850 |
7500 |
|
Item number |
7198 |
7199 |
7201 |
7208 |
7223 |
7228 |
|
Model |
SA-YZ2x70 |
SA-YZ2x80 |
SA-YZ2x90 |
SA-YZ4x50 |
SA-YQZ40D |
SSA-YQZ60 |
|
Maximum Tension(KN) |
2x70/1x140 |
2x80/1x160 |
2x90/1x180 |
4x50/2x100 |
40 |
60 |
|
Continuous Tension(KN) |
2x65/1x130 |
2x70/1x140 |
2x80/1x160 |
4x45/2x90 |
35 |
35 |
|
Maximum speed(Km/h) |
5 |
5 |
5 |
5 |
5 |
5 |
|
Bottom of groovr diamere(mm) |
Φ1700 |
Φ1700 |
Φ1700 |
Φ1600 |
Φ1200 |
Φ150 |
|
Number of groovr |
2x5 |
2x5 |
2x6 |
4x5 |
5 |
6 |
|
Maximum pull-back(KN) |
2x63/1X126 |
2x63/1X126 |
2x90/1X180 |
4x50/2X100 |
40 |
60 |
|
Maximum speed back (Km/h) |
2x1.6 |
2x1.6 |
2x1.7 |
4x1 |
5 |
5 |
|
Maximum suitable conductor diameter(mm) |
Φ45 |
Φ45 |
Φ48.8 |
Φ42.5 |
Φ32 |
Φ40 |
|
Engine power/speed (KW/RPM) |
82.5/2500 |
82.5/2500 |
82.5/2500 |
82.5/2500 |
851/2500 |
82.5/2000 |
|
Dimensions(m) |
5.3×2.3×2.9 |
5.3×2.3×2.9 |
5.3×2.3×2.9 |
5.3×2.3×2.9 |
4.2×1.8×2.4 |
5.5×1.9×2.4 |
|
Weight(kg) |
8500 |
8500 |
10500 |
12000 |
3600 |
4800 |
Related products
-
Lifting Pole Frame Aluminum Alloy Holding Inter...
Product introduction During used for transmission and distribution line engineering, The Internal Suspended Aluminum Alloy Holding Pole is used for internal suspension lifting of iron tower. Adopt single-arm style, free from direction restriction, use convenience. The main material adopts right angle aluminum alloy section, rivet joint makes, portable and durable. According to the height of the lifting power tower and the lifting load weight, the internal suspended a...
-
BELT DRIVE Drum WINCH DIESEL GASOLINE ENGINE Wi...
Product introduction 1. Gas engine powered winch 2. Max Pulling Force:50KN 3. Weight:190kg（No wire rope） 4. Dimension:1200x600x700mm 5. Wire rope:10mm 300M / 14mm 200m It is used for tower erection and sagging operation in line construction. It can also be used for pulling conductor or underground cable. The winches are the construction tools of erecting electric circuits of high pressure electric transmission in the sky and laying electrical cables underground. It...
-
PARALLEL GRIPPER Earth Wire Come Along Clamp PA...
Product introduction Earth Wire Gripper is suitable for the steel strand adjustment of the guyed tower and the ground wire tightening. 1.High class steel forged, thick&heavy, quality guaranteed. 2.Compact, smooth gap, thickness enhaced pulling handle, flexible&easy use. 3.The clamp adopts antiskid processing, with pretightening force. 4. All gripping jaws are produced with new technology to increase jaw life. 5. The parallel clamping structure is adopted, so...
-
ALUMINUM SINGLE HANGING UNIVERSAL STRINGING PULLEY
Product introduction It is a versatile stringing pulley. It either used in the head of insulator string, or fixed on the cross arm fixture. The side of the pulley can be opened so that the cable can be put into the pulley groove. UNIVERSAL STRINGING PULLEY TECHNICAL PARAMETERS Item number Rated load (kN) Sheave diameter(mm) Weight (kg) Applicable crossarm width of caliper (mm) Height (mm) Caliper weight(kg) 10295 10 Φ178×76 4.3 9...
-
DIESEL GASOLINE ENGINE TRACTION CABLE Tapered D...
Product introduction Tapered Drum Recovery Take-up Pulling Winch is used to withdraw the old conductors or erect the overhead earth wires. Tapered Drum Recovery Take-up Pulling Winch is powered by gasoline or diesel. The Tapered Drum Recovery Take-up Pulling Winch adopts tapered drum. The Tapered Drum Recovery Take-up Pulling Winch is convenient for cable recycling. RECOVERY TAKE-UP PULLING WINCH TECHNICAL PARAMETERS Item number Model Rated Load (KN) Pullin...
-
DUAL-SHEAVE ALUMINUM STEEL BOTH SIDE OPENING HO...
Product introduction Both side opening hoisting tackle is suitable for assemble and erect the tower,line construction,hoist devices and other hoist operation. The hoisting tackle group formed by the combination of hoisting tackle can change the direction of the traction wire rope of the hoisting tackle and the hoisting tackle group and lift or move objects for many times. Product is made of both side opening steel side plate with steel wheel. The wheel has good wear...