INSULATION Semiconductor Layer Insulating layer Stripping CABLE STRIPPER
Product introduction
Adjustable insulation cable layer stripper, insulated wire stripper is used to strip the layer insulation of the insulated cable. Knife-edge can be fine-tuned to overcome the thickness of the nonuniform outer layer of insulation, and not to hurt copper and aluminum line.It is made by high strength aluminum alloy.
The stripping range is 30mm, 40mm, 65mm, 105mm and 160mm in diameter. Model selection shall be based on the outer diameter of the cable.
CABLE STRIPPER TECHNICAL PARAMETERS
|
Item number |
Model |
Insulated Conductor Diameter(mm) |
Insulating Layer(mm) |
Weight(kg) |
Remarks |
|
21481 |
BP40 |
≤30 |
≤4.5 |
0.8 |
Ending Or Middle Stripping |
|
21482 |
BK40 |
≤40 |
≤12 |
0.8 |
|
|
21487 |
KBK65 |
≤65 |
≤15 |
1 |
|
|
21451 |
BK105 |
≤105 |
≤30 |
3.5 |
|
|
21452 |
BK160 |
≤160 |
≤35 |
5 |
Related products
-
Insulation Ladder Hanging Escape Climbing High ...
Product introduction Insulated rope ladder is a tool woven with insulated soft rope and insulated horizontal pipe, which can be used for climbing tools for live working at heights. The insulated rope ladder can be made of any length, the product is soft, the volume after folding is small, the transportation is convenient, and the use is light. The outer diameter of the side rope of the insulated rope ladder is 12mm. One time braided H-type rope is used to cross the ...
-
Stringing Block Special Block press rising wire...
Product introduction When paying off in high mountains and mountains, the height difference between iron towers is large, so it is very easy for the traction rope, conductor or ground wire to slip out of the paying off pulley groove when it is rised. The pressing pulley is mainly used to press the rising traction rope, conductor or ground wire during paying off. When it is applicable to wire rope or steel strand, the pulley is made of steel wheel. When applicable to...
-
CHAIN TYPE MANUAL HANDLE LIFTING ALUMINIUM ALLO...
Product introduction ALUMINIUM ALLOY CHAIN HOIST is apply to lifting machine parts, tightening steel stranded wire and aluminum stranded wire, ACSR, etc in the construction. The casing is made of aluminum alloy, which is light and easy to carry and operate. Great Quality manual hand series lifting chain hoist block is light weight, suitable for simple manual operation and has a strong safety performance and high safety of the product performance, easy to use securit...
-
660mm Wheels Sheaves Bundled Wire Conductor Pul...
Product introduction This 660*100mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ660 × Φ560 × 100 (mm). Under normal circumstances，its maximum suitable conductor is ACSR500, which means that the aluminum of our conducting wire has the maximum cross section of 500 square millimeters. The maximum diameter through which the sheave passes is 75mm. Under normal circumstances, the model of the maximu...
-
CHAIN TYPE HANDLE HOIST lever Hoisting Hand hoist
Product introduction CHAIN TYPE HANDLE HOIST is apply to lifting machine parts, tightening steel stranded wire, aluminum stranded wire and ACSR etc in the construction. Great Quality manual hand series lifting chain hoist block is light weight, suitable for simple manual operation and has a strong safety performance and high safety of the product performance, easy to use security; specifically designed for heavy industry, 360 ° rotating hand chain guide allowed oper...
-
ACSR Steel Strand CHAIN TYPE Cutting Tools Manu...
Product introduction The conductor cutter is used to cut off various conductor and steel strand. The maximum cut conductor diameter is 35 mm. 1.Cutting the ACSR or steel strand. Type selection shall be based on outer diameter. See the cutting range in the parameter table for details. 2.Because of its light weight, it is easy to carry. It can even be operated with only one hand. 3.The conductor cutter has convenient operation, is labor saving and safe and can not dam...