China wholesale Heavy Duty Nylon Rope Manufacturer – Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power
China wholesale Heavy Duty Nylon Rope Manufacturer – Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power Detail:
Product introduction
As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip.
The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire.
Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diameter, traction load and use environment.
When paying off in the air, the Mesh Socks Joint is used to hold the traction conductor tightly. Also used for cable pulling hoisting, the Mesh Socks Joint is used for buried or pipe traction on ground power cables. It can pass all kinds of pay-off pulley.
The usage is as follows: First press the opening of the Mesh Socks Joint with the palm of your hand to open it, then start to wear the cable inward. The deeper the cable is worn, the greater the pulling force. The mesh body of the Mesh Socks Joint is in the form of a grid, and the tension is tightened during construction. After the construction is completed, you only need to apply force in the opposite direction to remove the Mesh Socks Joint. The Mesh Socks Joint can be pulled by hand or lifting tool to achieve the function of wiring and protecting the cable.
The Mesh Socks Joint is used together with the Swivel Joint to release the twisting force.
We can also be customized according to customer requirements, such as single side pulling Mesh Socks Joint, double side pulling Mesh Socks Joint and wrapping Mesh Socks Joint.
Cable Mesh Socks Joint TECHNICAL PARAMETERS
|
Item number |
Model |
Applicable Cable Diameter (mm) |
Rated Load (KN) |
Weight (kg) |
|
21361 |
SWL-16 |
Φ12-16 |
10 |
0.8 |
|
21362 |
SWL-20 |
Φ16-20 |
10 |
0.8 |
|
21363 |
SWL-25 |
Φ20-25 |
15 |
1.0 |
|
21364 |
SWL-37 |
Φ25-37 |
15 |
1.0 |
|
21365 |
SWL-50 |
Φ37-50 |
15 |
1.0 |
|
21366` |
SWL-60 |
Φ50-60 |
25 |
2.4 |
|
21367 |
SWL-80 |
Φ60-80 |
25 |
2.4 |
|
21368 |
SWL-100 |
Φ80-100 |
25 |
2.4 |
|
21369 |
SWL-120 |
Φ100-120 |
30 |
2.6 |
|
21370 |
SWL-150 |
Φ120-150 |
30 |
2.6 |
|
21371 |
WT-100 |
Φ88-100 |
100 |
3.5 |
|
21371A |
WT-115 |
Φ100-115 |
100 |
3.5 |
|
21371B |
WT-130 |
Φ115-130 |
100 |
4 |
|
21371C |
WT-150 |
Φ130-150 |
100 |
4.5 |
|
21371D |
WT-180 |
Φ150-180 |
100 |
5 |
|
21372 |
WT-185 |
Φ180 |
200 |
6 |
|
21373 |
WT-240 |
Φ240 |
300 |
8 |
|
21374 |
WT-250 |
Φ250 |
300 |
8 |
|
21375 |
WT-280 |
Φ280 |
300 |
9 |
Product detail pictures:
Related Product Guide:
We're committed to providing easy,time-saving and money-saving one-stop purchasing service of consumer for China wholesale Heavy Duty Nylon Rope Manufacturer – Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power , The product will supply to all over the world, such as: Mongolia, Swaziland, Romania, All of our products comply with international quality standards and are greatly appreciated in a variety of markets around the world. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients in the near future.
By Eunice from Kyrgyzstan - 2018.08.12 12:27
Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.
By Sara from Slovakia - 2017.11.11 11:41
Related products
-
China wholesale Cable Pulling Clamp Factory ...
Product introduction 1. The body is forging of high strength aluminum alloy with light weight and no damage to conductor. 2. Use multi-segment type bolts clamp structure, so the traction load is large. Not to slip line and hurt the line. Need to specify when ordering diameter and conductor models. The groove for wire clamping shall be processed according to the wire diameter. Select the number of slice that make up the product according to the traction load. 3. Apply to large cross-section c...
-
OEM Small Chain Block Supplier – High S...
Product introduction The Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. According to the power adopted by the winch, it can b...
-
OEM Nylon Wheel Pulley Suppliers – Heav...
Product introduction Hydraulic crimping pliers is a professional hydraulic tool suitable for crimping cables and terminals in power engineering. The split hydraulic crimping pliers can be used with the hydraulic pump (the commonly used hydraulic pump is gasoline powered hydraulic pump or electric hydraulic pump, The output pressure of the hydraulic pump is ultra-high pressure, and the pressure reaches 80MPa.). The specifications and models of hydraulic crimping pliers range from 60 tons to 30...
-
China wholesale Wire Ratchet Tighte Manufacture...
Product introduction The product is used for the traction of various conductors, ground wires, OPGW and ADSS during tension setting out. Infinitely variable speed and pull force control ,the pull in the rope can be read on the line pull gauge . The max pull for conductor–stringing operation can preset ,automatic overload protection system . Spring applied –hydraulic release brake acts automatically in case of hydraulic failure ensure to safety . With hydraulic pulling rope clamp,replacing ste...
-
OEM Nylon Rope For Cable Pulling Manufacturers ...
Product introduction This 660*100mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ660 × Φ560 × 100 (mm). Under normal circumstances，its maximum suitable conductor is ACSR500, which means that the aluminum of our conducting wire has the maximum cross section of 500 square millimeters. The maximum diameter through which the sheave passes is 75mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protecto...
-
China wholesale Force Dynamometer Manufacturers...
Product introduction As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip. The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire. Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diameter, traction load and use environment. When paying off in the air, the Mesh Socks...