Stringing Pulley

  • ALUMINUM SINGLE HANGING UNIVERSAL STRINGING PULLEY

    ALUMINUM SINGLE HANGING UNIVERSAL STRINGING PULLEY

    Product introduction  It is a versatile stringing pulley. It either used in the head of insulator string, or fixed on the caliper of crossarm. The side of the pulley can be opened so that the cable can be put into the pulley groove. UNIVERSAL STRINGING PULLEY TECHNICAL PARAMETERS Item number Rated load (kN) Sheave diameter(mm) Weight (kg) Applicable crossarm width of caliper (mm) Height (mm) Caliper weight(kg) 10295 10 Φ178×76 4.3 99~175 95~159 1.6
  • Universal Optical Fiber Cable Stringing Equipment OPGW Cable Stringing Block OPGW Cable Stringing Pulley

    Universal Optical Fiber Cable Stringing Equipment OPGW Cable Stringing Block OPGW Cable Stringing Pulley

    Product introduction  The optical cable pulley is mainly used for laying various optical cables in the air. The sheaves are made of high strength MC nylon. The bottom of the pulley groove is provided with a small groove through the optical cable. All the sheaves are mounted on ball bearings. The frame of block is made of galvanized steel. U-shaped hanging plate is used for the head of the pulley, or the hanging plate shown the same as the single wheel paying off pulley. The wheel groove can b...
  • FOUR sheaves COMBINED BLOCK CABLE PULLING SPECIAL BLOCK FOR CONDUCTOR OPGW SHEAVE PULLEY BLOCK

    FOUR sheaves COMBINED BLOCK CABLE PULLING SPECIAL BLOCK FOR CONDUCTOR OPGW SHEAVE PULLEY BLOCK

    Product introduction  It is used for laying various optical cables and cables in the air. It is convenient for the cable to be pulled along the bending radius of the pulley. The head of the pulley is of hook type or ring type, or can be of hanging plate type. The beam can be opened to put cables. The sheaves of Aerial Cable Stringing Roller are made of aluminum alloy or high strength MC nylon. All the sheaves are mounted on ball bearings. The frame of pulley is made of galvanized steel. The s...
  • 508mmlarge Diameter Wheels Sheaves Bundled Wire Conductor Pulley Stringing Block

    508mmlarge Diameter Wheels Sheaves Bundled Wire Conductor Pulley Stringing Block

    This 508*75mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ508 × Φ408 × 75 (mm). Under normal circumstances,its maximum suitable conductor is ACSR400, which means that the aluminum of our conducting wire has the maximum cross section of 400 square millimeters. The maximum diameter through which the sheave passes is 55mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protector is J400B.

  • Power Transmission Line Stringing Construction Bundled Conductor Aerial Helicopter Stringing Pulley

    Power Transmission Line Stringing Construction Bundled Conductor Aerial Helicopter Stringing Pulley

    In the harsh environment such as mountains, valleys and rivers, it is not convenient to manually lay the guide rope on the ground, the helicopter can be used to pull the guide rope and directly hang it in the pulley groove of the Aerial Helicopter Stringing Pulley. Convenient for subsequent wire laying.

  • Pulley Stringing Block Special Block press rising wire pressing pulley Hold Down pulley

    Pulley Stringing Block Special Block press rising wire pressing pulley Hold Down pulley

    Product introduction  When paying off in high mountains and mountains, the height difference between iron towers is large, so it is very easy for the traction rope, conductor or ground wire to slip out of the paying off pulley groove when it is rised. The pressing pulley is mainly used to press the rising traction rope, conductor or ground wire during paying off. When it is applicable to wire rope or steel strand, the pulley is made of steel wheel. When applicable to the conductor, the pulley...
  • WIRE ROPE CABLE STRING PULLEY BLOCK FOR CONDUCTOR HIGH SPEED TURNING BLOCK High speed steering BLOCK

    WIRE ROPE CABLE STRING PULLEY BLOCK FOR CONDUCTOR HIGH SPEED TURNING BLOCK High speed steering BLOCK

    Product introduction  High speed steering block is apply to steel wire rope traction and turning During tension paying off. Its pulley groove can pass through steel wire rope Anti-twist Fixed Joint. The pulley of high-speed steering block is made of steel, which is divided into hanging plate open type and 8-ring closed type. High strength, heavy load, wear resistance. The maximum allowable speed of hauling rope is 80m/min. 12141B is front and rear double wheel type, which can replace 12142. O...
  • CONDUCTOR EARTH GROUNDING WIRE STRING PULLEY HOOK TYPE GROUNDING PULLEY GROUNDING EARTHING PULLEY

    CONDUCTOR EARTH GROUNDING WIRE STRING PULLEY HOOK TYPE GROUNDING PULLEY GROUNDING EARTHING PULLEY

    Product introduction  The grounding earthing pulley is applicable to eliminate induced staticelectricity in conductor or grounding wire spread when tensioning erect wires . Notes : The grounding wire shall be configured separately. 1.Toeliminate induce electricity in conductor and grounding wire when releasingwires. 2.Mountedon the outlet side of tensioners or the inlet side of puller, and drawn by twostay grounding wires. 3.Tri-sheave mechanism ,compacted automatically. Ensure that the condu...
  • SPECIAL CABLE ground wire OPGW DOUBLE SHEAVE PULLEY BLOCK Double wheel ground wire changing pulley

    SPECIAL CABLE ground wire OPGW DOUBLE SHEAVE PULLEY BLOCK Double wheel ground wire changing pulley

    Product introduction  Suitable for exchanging overhead grounding wire with OPGW operation. The overhead steel strand ground wire is replaced with OPGW by ground wire changing pulley. The pulley is generally made of MC nylon wheels, which is light, wear-resistant and does not damage the wire. Aluminum wheels need to be customized. OPGW MESH SOCK JOINTS TECHNICAL PARAMETERS Item number Model Outing Size (mm) Rated Load (KN) Weight (kg) 20124 SH2-OPGW1 152*110*343 2 2...
  • Cable Pulling Pulley Casting Steel Wheel Sheave Hook Type Hoisting Lifting Block For Construction Hoisting Tackle

    Cable Pulling Pulley Casting Steel Wheel Sheave Hook Type Hoisting Lifting Block For Construction Hoisting Tackle

    Casting steel wheel hoisting tackle is suitable for assemble and erect the tower,line construction,hoist devices and other hoist operation.
    The hoisting tackle group formed by the combination of hoisting tackle can change the direction of the traction wire rope of the hoisting tackle and the hoisting tackle group and lift or move moving objects for many times.

  • BOTH SIDE OPENING WITH DUAL-SHEAVE STRINGING BLOCK EQUIPMENT ALUMINUM STEEL BOTH SIDE OPENING HOISTING TACKLE

    BOTH SIDE OPENING WITH DUAL-SHEAVE STRINGING BLOCK EQUIPMENT ALUMINUM STEEL BOTH SIDE OPENING HOISTING TACKLE

    Product introduction  1. The body is forging of high strength aluminum alloy with light weight and no damage to conductor. 2. Use multi-segment type bolts clamp structure, so the traction load is large. Not to slip line and hurt the line. Need to specify when ordering diameter and conductor models. The groove for wire clamping shall be processed according to the wire diameter. Select the number of slice that make up the product according to the traction load. 3. Apply to large cross-section c...
  • Cable Pulling Pulley Casting Aluminum Wheel Sheave Hook Type Hoisting Lifting Block For Construction Aluminum Wheel Hoisting Tackle

    Cable Pulling Pulley Casting Aluminum Wheel Sheave Hook Type Hoisting Lifting Block For Construction Aluminum Wheel Hoisting Tackle

    Product introduction  1. The body is forging of high strength aluminum alloy with light weight and no damage to conductor. 2. Use multi-segment type bolts clamp structure, so the traction load is large. Not to slip line and hurt the line. Need to specify when ordering diameter and conductor models. The groove for wire clamping shall be processed according to the wire diameter. Select the number of slice that make up the product according to the traction load. 3. Apply to large cross-section c...
123 Next > >> Page 1 / 3