Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint

Short Description:

As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip.


Product Detail

Product Tags

Product introduction

As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip.

The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire.

Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diameter, traction load and use environment.

When paying off in the air, the Mesh Socks Joint is used to hold the traction conductor tightly. Also used for cable pulling hoisting, the Mesh Socks Joint is used for buried or pipe traction on ground power cables. It can pass all kinds of pay-off pulley.

The usage is as follows: First press the opening of the Mesh Socks Joint with the palm of your hand to open it, then start to wear the cable inward. The deeper the cable is worn, the greater the pulling force. The mesh body of the Mesh Socks Joint is in the form of a grid, and the tension is tightened during construction. After the construction is completed, you only need to apply force in the opposite direction to remove the Mesh Socks Joint. The Mesh Socks Joint can be pulled by hand or lifting tool to achieve the function of wiring and protecting the cable.

The Mesh Socks Joint is used together with the Swivel Joint to release the twisting force.

We can also be customized according to customer requirements, such as single side pulling Mesh Socks Joint, double side pulling Mesh Socks Joint and wrapping Mesh Socks Joint.

As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to strench.

1 (47)
1 (48)

Cable Mesh Socks Joint TECHNICAL PARAMETERS 

Item number

Model

Applicable

Cable Diameter

(mm)

Rated Load

(KN)

Weight

(kg)

21361

SWL-16

Φ12-16

10

0.8

21362

SWL-20

Φ16-20

10

0.8

21363

SWL-25

Φ20-25

15

1.0

21364

SWL-37

Φ25-37

15

1.0

21365

SWL-50

Φ37-50

15

1.0

21366`

SWL-60

Φ50-60

25

2.4

21367

SWL-80

Φ60-80

25

2.4

21368

SWL-100

Φ80-100

25

2.4

21369

SWL-120

Φ100-120

30

2.6

21370

SWL-150

Φ120-150

30

2.6

21371

WT-100

Φ88-100

100

3.5

21371A

WT-115

Φ100-115

100

3.5

21371B

WT-130

Φ115-130

100

4

21371C

WT-150

Φ130-150

100

4.5

21371D

WT-180

Φ150-180

100

5

21372

WT-185

Φ180

200

6

21373

WT-240

Φ240

300

8

21374

WT-250

Φ250

300

8

21375

WT-280

Φ280

300

9


1 (50)
1 (49)

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • SHEAVE HOOK CABLE ROLLER WHEEL PULLEY NYLON ALUMINIUM ALLOY SINGLE STRINGING PULLEY

      SHEAVE HOOK CABLE ROLLER WHEEL PULLEY NYLON ALU...

      Product introduction  Apply to pull conductor on straight pole.Splicing sleeve,steel wire rope and connector can pass through the groove. Pulley Block With Hook Single Sheave is used for releasing the aluminum wire, ACSR, insulated wire in pole and tower erection. The wheel groove can be through with clamp pipe, aluminum tube, connector etc.. The material is aluminum alloy and MC nylon . Pulley pendant is combined plate and hook type. The stringing roller is suitable...

    • WIRE ROPE CABLE STRING PULLEY BLOCK FOR CONDUCTOR HIGH SPEED TURNING BLOCK High speed steering BLOCK

      WIRE ROPE CABLE STRING PULLEY BLOCK FOR CONDUCT...

      Product introduction  High speed steering block is apply to steel wire rope traction and turning During tension paying off. Its pulley groove can pass through steel wire rope Anti-twist Fixed Joint. The pulley of high-speed steering block is made of steel, which is divided into hanging plate open type and 8-ring closed type. High strength, heavy load, wear resistance. The maximum allowable speed of hauling rope is 80m/min. 12141B is front and rear double wheel type, ...

    • Wire Rope Cable Sleeve Connector GROUND WIRE OPGW ADSS Mesh Sock Joints

      Wire Rope Cable Sleeve Connector GROUND WIRE OP...

      Product introduction  Apply to ADSS or OPGW cable Ground wire contruction. As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip. The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire. Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diamete...

    • MANUAL PROFESSIONAL STEEL WIRE ROPE CUTTER UNIVERSAL WIRE CLIPPER

      MANUAL PROFESSIONAL STEEL WIRE ROPE CUTTER UNIV...

      Product introduction  1.Used for cutting metal bars, lead wires, steel wires and wires etc. 2.Light weight. 3.Save time and labor. 4.Do not exceed the shear range. 5.The blades are manufactured from high strength special steel, heat treated to ensure a long service life. 6.The clearance between the two cutting edges is adjustable. WIRE CLIPPER TECHNICAL PARAMETERS Item number Model(Total length) Cutting Range(mm) Weight(kg) ...

    • 508mmlarge Diameter Wheels Sheaves Bundled Wire Conductor Pulley Stringing Block

      508mmlarge Diameter Wheels Sheaves Bundled Wire...

      Product introduction  This 508*75mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ508 × Φ408 × 75 (mm). Under normal circumstances,its maximum suitable conductor is ACSR400, which means that the aluminum of our conducting wire has the maximum cross section of 400 square millimeters. The maximum diameter through which the sheave passes is 55mm. Under normal circumstances, the model of the maximum...

    • ACSR STEEL STRAND SPLICING SLEEVE PROTECTOR Protective sleeve of crimping tube conductor SPLICE PROTECTION SLEEVES

      ACSR STEEL STRAND SPLICING SLEEVE PROTECTOR Pro...

      Product introduction  Apply to protecting conductor pressure crimping tube on ACSR paying off and make it avoid torsion when pass through pulleys.  Splicing protection sleeve is composed of two half steel pipes and four rubber heads. It is used to protect the crimping pipe and prevent the crimping tube from directly contacting the pulley and bending during paying off. The splicing protection sleeve must be selected according to the conductor specification (crimping t...