China wholesale Large Cable Rollers Factory – Power Line Ground Cable Roller Nylon Or Aluminum Or Steel Sheave Cable Pulling Pulley – Donghuan Power
China wholesale Large Cable Rollers Factory – Power Line Ground Cable Roller Nylon Or Aluminum Or Steel Sheave Cable Pulling Pulley – Donghuan Power Detail:
Product introduction
Cable rollers should always be used when pulling cables. Straight cable runs are pulled in using straight cable rollers suitably placed in the ground, avoid damaging cable surface sheath by friction between cable and ground. Straight cable runs are pulled in using straight cable rollers suitably placed in the cable trench to prevent the cable being dragged on the trench bottom or in mud. Cable roller spacing is dependent on cable type being laid and the cable pulling tension along the route. Leading cable rollers are used to support the cable over the entire drum width immediately before being pulled into the trench.
According to the ground environment and usage habits, the cable roller has three structures. Respectively: casting aluminum structure, steel plate structure and steel pipe structure. Steel pipe structures are also divided into simple and reinforced structures
Common cable pulley specifications include outer diameter 120mm* wheel width 130mm, outer diameter 140mm* wheel width 160mm, outer diameter 120mm* wheel width 200mm and outer diameter 140mm* wheel width 210mm, etc.
Nylon sheaves are represented by N letters.The rest are aluminum sheaves. The steel wheel needs to be customized.
Ground Cable Roller Technical Parameters
|
Item number |
Model |
Applicable Cabe（MM） |
Rated load (kN) |
Carrier Structure |
Weight (kg) |
|
21171 |
SHL1 |
≤ Φ150 |
5 |
Casting Aluminum |
5.4 |
|
21172 |
SHL1N |
5 |
3.6 |
||
|
21181 |
SHL1B |
≤ Φ150 |
5 |
Steel Plate |
5.5 |
|
21182 |
SHL1BN |
5 |
3.7 |
||
|
21183 |
SHL2BN |
≤ Φ160 |
5 |
5.5 |
|
|
21184 |
SHL3BN |
≤ Φ200 |
5 |
8.0 |
|
|
21191 |
SHL1G |
≤ Φ150 |
5 |
Steel Pipe |
5.1 |
|
21192 |
SHL1GN |
5 |
3.3 |
||
|
21193 |
SHL2GN |
≤ Φ160 |
5 |
6.5 |
|
|
21194 |
SHL3GN |
≤ Φ200 |
5 |
8.5 |
Product detail pictures:
Related Product Guide:
Our business puts emphasis over the administration, the introduction of talented staff, plus the construction of employees building, striving hard to boost the standard and liability consciousness of staff members. Our corporation successfully attained IS9001 Certification and European CE Certification of China wholesale Large Cable Rollers Factory – Power Line Ground Cable Roller Nylon Or Aluminum Or Steel Sheave Cable Pulling Pulley – Donghuan Power , The product will supply to all over the world, such as: Barbados, India, Honduras, Our product quality is one of the major concerns and has been produced to meet the customer's standards. "Customer services and relationship" is another important area which we understand good communication and relationships with our customers is the most significant power to run it as a long term business.
By Clementine from Serbia - 2018.06.05 13:10
The company can keep up with the changes in this industry market, product updates fast and the price is cheap, this is our second cooperation, it's good.
By Kevin Ellyson from Philippines - 2017.03.28 16:34
Related products
-
OEM Gantry Block And Tackle Manufacturers ̵...
Product introduction The Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. According to the power adopted by the winch, it can b...
-
China wholesale Snatch Block Sheave Factory ...
Product introduction Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use. Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom. Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light a...
-
China wholesale Cable Stripper Factory – ...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...
-
OEM Hand Crank Capstan Winch Manufacturers R...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...
-
OEM Cable Lug Crimping Machine Manufacturer ...
Product introduction Hydraulic crimping pliers is a professional hydraulic tool suitable for crimping cables and terminals in power engineering. The split hydraulic crimping pliers can be used with the hydraulic pump (the commonly used hydraulic pump is gasoline powered hydraulic pump or electric hydraulic pump, The output pressure of the hydraulic pump is ultra-high pressure, and the pressure reaches 80MPa.). The specifications and models of hydraulic crimping pliers range from 60 tons to 30...
-
China wholesale Fiber Optic Cable Cutter Suppli...
Product introduction As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip. The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire. Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diameter, traction load and use environment. When paying off in the air, the Mesh Socks...