China wholesale Metal Wire Clamps Manufacturers – Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power
China wholesale Metal Wire Clamps Manufacturers – Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power Detail:
Product introduction
As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip.
The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire.
Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diameter, traction load and use environment.
When paying off in the air, the Mesh Socks Joint is used to hold the traction conductor tightly. Also used for cable pulling hoisting, the Mesh Socks Joint is used for buried or pipe traction on ground power cables. It can pass all kinds of pay-off pulley.
The usage is as follows: First press the opening of the Mesh Socks Joint with the palm of your hand to open it, then start to wear the cable inward. The deeper the cable is worn, the greater the pulling force. The mesh body of the Mesh Socks Joint is in the form of a grid, and the tension is tightened during construction. After the construction is completed, you only need to apply force in the opposite direction to remove the Mesh Socks Joint. The Mesh Socks Joint can be pulled by hand or lifting tool to achieve the function of wiring and protecting the cable.
The Mesh Socks Joint is used together with the Swivel Joint to release the twisting force.
We can also be customized according to customer requirements, such as single side pulling Mesh Socks Joint, double side pulling Mesh Socks Joint and wrapping Mesh Socks Joint.
Cable Mesh Socks Joint TECHNICAL PARAMETERS
|
Item number |
Model |
Applicable Cable Diameter (mm) |
Rated Load (KN) |
Weight (kg) |
|
21361 |
SWL-16 |
Φ12-16 |
10 |
0.8 |
|
21362 |
SWL-20 |
Φ16-20 |
10 |
0.8 |
|
21363 |
SWL-25 |
Φ20-25 |
15 |
1.0 |
|
21364 |
SWL-37 |
Φ25-37 |
15 |
1.0 |
|
21365 |
SWL-50 |
Φ37-50 |
15 |
1.0 |
|
21366` |
SWL-60 |
Φ50-60 |
25 |
2.4 |
|
21367 |
SWL-80 |
Φ60-80 |
25 |
2.4 |
|
21368 |
SWL-100 |
Φ80-100 |
25 |
2.4 |
|
21369 |
SWL-120 |
Φ100-120 |
30 |
2.6 |
|
21370 |
SWL-150 |
Φ120-150 |
30 |
2.6 |
|
21371 |
WT-100 |
Φ88-100 |
100 |
3.5 |
|
21371A |
WT-115 |
Φ100-115 |
100 |
3.5 |
|
21371B |
WT-130 |
Φ115-130 |
100 |
4 |
|
21371C |
WT-150 |
Φ130-150 |
100 |
4.5 |
|
21371D |
WT-180 |
Φ150-180 |
100 |
5 |
|
21372 |
WT-185 |
Φ180 |
200 |
6 |
|
21373 |
WT-240 |
Φ240 |
300 |
8 |
|
21374 |
WT-250 |
Φ250 |
300 |
8 |
|
21375 |
WT-280 |
Φ280 |
300 |
9 |
Product detail pictures:
Related Product Guide:
"Quality 1st, Honesty as base, Sincere company and mutual profit" is our idea, in an effort to create consistently and pursue the excellence for China wholesale Metal Wire Clamps Manufacturers – Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power , The product will supply to all over the world, such as: Malaysia, Porto, Egypt, We can meet the various needs of customers at home and abroad. We welcome new and old customers to come to consult & negotiate with us. Your satisfaction is our motivation! Let us work together to write a brilliant new chapter!
By Ella from Georgia - 2017.06.16 18:23
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
By Lynn from Anguilla - 2018.09.29 17:23
Related products
-
China wholesale Cable Lug Hydraulic Crimping To...
Product introduction Hydraulic crimping pliers is a professional hydraulic tool suitable for crimping cables and terminals in power engineering. The split hydraulic crimping pliers can be used with the hydraulic pump (the commonly used hydraulic pump is gasoline powered hydraulic pump or electric hydraulic pump, The output pressure of the hydraulic pump is ultra-high pressure, and the pressure reaches 80MPa.). The specifications and models of hydraulic crimping pliers range from 60 tons to 30...
-
China wholesale Usb Cable Roller Manufacturer &...
Product introduction Cable rollers should always be used when pulling cables. Straight cable runs are pulled in using straight cable rollers suitably placed in the ground, avoid damaging cable surface sheath by friction between cable and ground. Straight cable runs are pulled in using straight cable rollers suitably placed in the cable trench to prevent the cable being dragged on the trench bottom or in mud. Cable roller spacing is dependent on cable type being laid and the cable pulling tens...
-
OEM Industrial Nylon Rope Factory – Pul...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...
-
China wholesale Pulley For Wire Cable Suppliers...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...
-
OEM Pulley Block With Swivel Hook Suppliers ...
Product introduction This 822mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ822 × Φ710 × 110 (mm). Under normal circumstances，its maximum suitable conductor is ACSR630, which means that the aluminum of our conducting wire has the maximum cross section of 630 square millimeters. The maximum diameter through which the sheave passes is 85mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protector is...
-
China wholesale Wire End Stripping Machine Supp...
Product introduction This1160mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ1160 × Φ1000 × 150 (mm). Under normal circumstances，its maximum suitable conductor is ACSR1250, which means that the aluminum of our conducting wire has the maximum cross section of 1250 square millimeters. The maximum diameter through which the sheave passes is125mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protect...