OEM Cable End Stripper Supplier – Grip Cable Socks Mesh Cable Net Sleeve Conductor Mesh Socks Joint – Donghuan Power
OEM Cable End Stripper Supplier – Grip Cable Socks Mesh Cable Net Sleeve Conductor Mesh Socks Joint – Donghuan Power Detail:
Product introduction
As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip.
The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire.
Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diameter, traction load and use environment.
When paying off in the air, the Mesh Socks Joint is used to hold the traction conductor tightly. Also used for cable pulling hoisting, the Mesh Socks Joint is used for buried or pipe traction on ground power cables. It can pass all kinds of pay-off pulley.
The usage is as follows: First press the opening of the Mesh Socks Joint with the palm of your hand to open it, then start to wear the cable inward. The deeper the cable is worn, the greater the pulling force. The mesh body of the Mesh Socks Joint is in the form of a grid, and the tension is tightened during construction. After the construction is completed, you only need to apply force in the opposite direction to remove the Mesh Socks Joint. The Mesh Socks Joint can be pulled by hand or lifting tool to achieve the function of wiring and protecting the cable.
The Mesh Socks Joint is used together with the Swivel Joint to release the twisting force.
As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to strench.
High strength braided nylon rope TECHNICAL PARAMETERS
|
Item number |
Model |
Applicable Conductor(ACSR) |
Rated Load (KN) |
|
|
Single head |
Double head |
|||
|
17161 |
17181 |
SLW(S)-1.5 |
ACSR70-95 |
15 |
|
17162 |
17182 |
SLW(S)-2 |
ACSR120-150 |
20 |
|
17163 |
17183 |
SLW(S)-2.5 |
ACSR185-240 |
25 |
|
17164 |
17184 |
SLW(S)-3 |
ACSR300-400 |
30 |
|
17165 |
17185 |
SLW(S)-4 |
ACSR500-600 |
40 |
|
17166 |
17186 |
SLW(S)-5 |
ACSR720 |
50 |
|
17167 |
17187 |
SLW(S)-7 |
ACSR900 |
70 |
|
17168 |
17188 |
SLW(S)-8 |
ACSR1000-1120 |
80 |
|
17169 |
17189 |
SLW(S)-12 |
ACSR1250 |
120 |
Product detail pictures:
Related Product Guide:
go on to boost, to be certain item quality in line with market and buyer standard demands. Our firm has a excellent assurance procedure happen to be established for OEM Cable End Stripper Supplier – Grip Cable Socks Mesh Cable Net Sleeve Conductor Mesh Socks Joint – Donghuan Power , The product will supply to all over the world, such as: Madras, venezuela, Canada, Our main objectives are to provide our customers worldwide with good quality, competitive price, satisfied delivery and excellent services. Customer satisfaction is our main goal. We welcome you to visit our showroom and office. We are looking forward to establish business relation with you.
By Eleanore from America - 2018.12.14 15:26
We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
By Nicci Hackner from Panama - 2017.04.18 16:45
Related products
-
OEM ACSR Conductor Cutting Tool Supplier –...
Product introduction Anti twist steel wire rope is a special textile steel wire rope made of high-strength hot-dip galvanized high-quality steel wire through special processing. It is also called non rotating steel wire rope because its cross section is hexagonal and does not twist when stressed. Compared with ordinary round strand wire rope, it has the advantages of high strength, good flexibility, corrosion prevention and rust prevention, no gold hook, not easy to knot, long service life an...
-
OEM Wire Cable Sheaves Supplier – Diese...
Double drum winch is used in power transmission and distribution engineering, telephone construction tower erection, traction cable, line, hoisting tools , tower erection , pole setting,stringing wire in electrical power line construction, the winch is driven by a belt,effectively prevent the damage of overload. The double drum structure can reduce the damage of the wire rope during traction.The power of the winch can be diesel power or gasoline power as required.The model jjcs-50t double dru...
-
OEM Come Along Chain Hoist Supplier – H...
Product introduction The Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. According to the power adopted by the winch, it can b...
-
OEM Hand Held Cable Cutters Supplier – ...
Product introduction Nylon wheel hoisting tackle is suitable for assemble and erect the tower,line construction,hoist devices and other hoist operation. The hoisting tackle group formed by the combination of hoisting tackle can change the direction of the traction wire rope of the hoisting tackle and the hoisting tackle group and lift or move moving objects for many times. Product is made of aluminum alloy side plate with MC nylon wheel, it has light weight. Easy to carry and hang. The wheel ...
-
OEM Strong Nylon Rope Manufacturer – Cu...
Product introduction This 660*100mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ660 × Φ560 × 100 (mm). Under normal circumstances，its maximum suitable conductor is ACSR500, which means that the aluminum of our conducting wire has the maximum cross section of 500 square millimeters. The maximum diameter through which the sheave passes is 75mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protecto...
-
OEM Cable Hold Down Clips Supplier – Al...
Product introduction Aluminum Alloy Conductor Grippers are a commonly used wire holding tool in the construction and maintenance of electric power, telecommunications and railway electrification overhead lines.. The grippers is applicable to adjust sag and tension conductor during stringing. The grippers is forged from high-strength aluminum alloy, with small volume and light weight. All gripping jaws are produced with new technology to increase jaw life. The grippers are designed to be used...