OEM Cable Wire Roller Manufacturer – Power Line Ground Cable Roller Nylon Or Aluminum Or Steel Sheave Cable Pulling Pulley – Donghuan Power
OEM Cable Wire Roller Manufacturer – Power Line Ground Cable Roller Nylon Or Aluminum Or Steel Sheave Cable Pulling Pulley – Donghuan Power Detail:
Product introduction
Cable rollers should always be used when pulling cables. Straight cable runs are pulled in using straight cable rollers suitably placed in the ground, avoid damaging cable surface sheath by friction between cable and ground. Straight cable runs are pulled in using straight cable rollers suitably placed in the cable trench to prevent the cable being dragged on the trench bottom or in mud. Cable roller spacing is dependent on cable type being laid and the cable pulling tension along the route. Leading cable rollers are used to support the cable over the entire drum width immediately before being pulled into the trench.
According to the ground environment and usage habits, the cable roller has three structures. Respectively: casting aluminum structure, steel plate structure and steel pipe structure. Steel pipe structures are also divided into simple and reinforced structures
Common cable pulley specifications include outer diameter 120mm* wheel width 130mm, outer diameter 140mm* wheel width 160mm, outer diameter 120mm* wheel width 200mm and outer diameter 140mm* wheel width 210mm, etc.
Nylon sheaves are represented by N letters.The rest are aluminum sheaves. The steel wheel needs to be customized.
Ground Cable Roller Technical Parameters
|
Item number |
Model |
Applicable Cabe（MM） |
Rated load (kN) |
Carrier Structure |
Weight (kg) |
|
21171 |
SHL1 |
≤ Φ150 |
5 |
Casting Aluminum |
5.4 |
|
21172 |
SHL1N |
5 |
3.6 |
||
|
21181 |
SHL1B |
≤ Φ150 |
5 |
Steel Plate |
5.5 |
|
21182 |
SHL1BN |
5 |
3.7 |
||
|
21183 |
SHL2BN |
≤ Φ160 |
5 |
5.5 |
|
|
21184 |
SHL3BN |
≤ Φ200 |
5 |
8.0 |
|
|
21191 |
SHL1G |
≤ Φ150 |
5 |
Steel Pipe |
5.1 |
|
21192 |
SHL1GN |
5 |
3.3 |
||
|
21193 |
SHL2GN |
≤ Φ160 |
5 |
6.5 |
|
|
21194 |
SHL3GN |
≤ Φ200 |
5 |
8.5 |
Product detail pictures:
Related Product Guide:
Our development depends on the advanced equipment ,excellent talents and continuously strengthened technology forces for OEM Cable Wire Roller Manufacturer – Power Line Ground Cable Roller Nylon Or Aluminum Or Steel Sheave Cable Pulling Pulley – Donghuan Power , The product will supply to all over the world, such as: Miami, Morocco, Philippines, We always insist on the principle of "Quality and service are the life of the product". Till now, our products have been exported to more than 20 countries under our strict quality control and high level service.
By Eden from Stuttgart - 2018.12.11 11:26
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By John biddlestone from Bahamas - 2018.09.29 13:24
Related products
-
China wholesale Small Cable Rollers Suppliers &...
Product introduction This 660*100mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ660 × Φ560 × 100 (mm). Under normal circumstances，its maximum suitable conductor is ACSR500, which means that the aluminum of our conducting wire has the maximum cross section of 500 square millimeters. The maximum diameter through which the sheave passes is 75mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protecto...
-
OEM Mini Lever Hoist Manufacturers – Hi...
Product introduction The Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. According to the power adopted by the winch, it can b...
-
China wholesale Twisted Nylon Cord Suppliers &#...
Product introduction: Swivel Joints are a commonly used tools for traction connection in the construction and maintenance of electric power, telecommunications and railway electrification overhead lines. It is suitable to traction of connecting anti-twisting wire rope and conductor. During the construction of transmission lines, traction of overhead conductor or underground cables, it is used to connect with the mesh sock, head board and anti-twisting wire rope, in order to release anti-twist...
-
China wholesale Cable Lug Crimping Machine Supp...
Product introduction Hydraulic crimping pliers is a professional hydraulic tool suitable for crimping cables and terminals in power engineering. The split hydraulic crimping pliers can be used with the hydraulic pump (the commonly used hydraulic pump is gasoline powered hydraulic pump or electric hydraulic pump, The output pressure of the hydraulic pump is ultra-high pressure, and the pressure reaches 80MPa.). The specifications and models of hydraulic crimping pliers range from 60 tons to 30...
-
OEM Come Along Chain Hoist Supplier – H...
Product introduction The product is used for the traction of various conductors, ground wires, OPGW and ADSS during tension setting out. Infinitely variable speed and pull force control ,the pull in the rope can be read on the line pull gauge . The max pull for conductor–stringing operation can preset ,automatic overload protection system . Spring applied –hydraulic release brake acts automatically in case of hydraulic failure ensure to safety . With hydraulic pulling rope clamp,replacing ste...
-
China wholesale Ball Bearing Pulley Block Facto...
Product introduction This 822mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ822 × Φ710 × 110 (mm). Under normal circumstances，its maximum suitable conductor is ACSR630, which means that the aluminum of our conducting wire has the maximum cross section of 630 square millimeters. The maximum diameter through which the sheave passes is 85mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protector is...