OEM Hand Winch Factory – BELT DRIVE VARIABLE SPEED WIRE ROPE TRACTION PULLING CABLE ELECTRIC POWER WINCH – Donghuan Power
OEM Hand Winch Factory – BELT DRIVE VARIABLE SPEED WIRE ROPE TRACTION PULLING CABLE ELECTRIC POWER WINCH – Donghuan Power Detail:
Product introduction
The product is used for the tensioning of various conductors, ground wires, OPGW and ADSS during tension setting out.
Bull wheel with wear proof MC nylon lining segments.
Infinitely variable tension control and constant tension conductor stringing.
Spring applied hydraulic released brake acts automatically in case of hydraulic failure to ensu safety
Attached two sets of hydraulic power output interface to connect hydraulic conductor reel stand.
Hydraulic Traction with various traction loads ranging from 3 tons to 42 tons have a complete range.
Engine : Cummins water cooled diesel engine.
Main variable pump and main motor :Rexroth (BOSCH)
Reducer :Rexroth (BOSCH)
Main hydraulic valve : Rexroth (BOSCH)
Matched reel:GSP1100-1400
Hydraulic TENSIONING TECHNICAL PARAMETERS
|
Item number |
07212 |
07155 |
07171 |
07181 |
07192 |
07197 |
|
Model |
SA-YZM7.5 |
SA-YZ30A |
SA-YZ40A |
SA-YZ2x35 |
SA-YZ2x40B |
SA-YZ2x55 |
|
Maximum Tension(KN) |
7.5 |
30 |
40 |
2×35/1×70 |
2×40/1×80 |
2×55/1×110 |
|
Continuous Tension(KN) |
7.5 |
25 |
35 |
2×30/1×60 |
2×35/1×70 |
2×50/1×100 |
|
Maximum speed(Km/h) |
40m/min |
5 |
5 |
5 |
5 |
5 |
|
Bottom of groovr diamere(mm) |
Φ1100 |
Φ1200 |
Φ1200 |
Φ1200 |
Φ1500 |
Φ1600 |
|
Number of groovr |
/ |
5 |
5 |
2×5 |
2×5 |
2×5 |
|
Maximum pull-back(KN) |
/ |
20 |
40 |
2×30/1X60 |
2×40/1X80 |
2×50/1X100 |
|
Maximum speed back (Km/h) |
/ |
/ |
3 |
2×2.1 |
2×1.5 |
2×2.1 |
|
Maximum suitable conductor diameter(mm) |
/ |
Φ32 |
Φ32 |
Φ32 |
Φ40 |
Φ42.5 |
|
Engine power/speed (KW/RPM) |
/ |
11/2200 |
37/2800 |
51/2500 |
51/2500 |
54/2500 |
|
Dimensions(m) |
2.3×1.2×1.6 |
3.6×1.8×2.4 |
3.4×1.8×2.4 |
4.4×2.1×2.6 |
4.5×2.2×2.8 |
5.0×2.3×2.7 |
|
Weight(kg) |
450 |
1700 |
2800 |
4000 |
4850 |
7500 |
|
Item number |
7198 |
7199 |
7201 |
7208 |
7223 |
7228 |
|
Model |
SA-YZ2x70 |
SA-YZ2x80 |
SA-YZ2x90 |
SA-YZ4x50 |
SA-YQZ40D |
SSA-YQZ60 |
|
Maximum Tension(KN) |
2×70/1×140 |
2×80/1×160 |
2×90/1×180 |
4×50/2×100 |
40 |
60 |
|
Continuous Tension(KN) |
2×65/1×130 |
2×70/1×140 |
2×80/1×160 |
4×45/2×90 |
35 |
35 |
|
Maximum speed(Km/h) |
5 |
5 |
5 |
5 |
5 |
5 |
|
Bottom of groovr diamere(mm) |
Φ1700 |
Φ1700 |
Φ1700 |
Φ1600 |
Φ1200 |
Φ150 |
|
Number of groovr |
2×5 |
2×5 |
2×6 |
4×5 |
5 |
6 |
|
Maximum pull-back(KN) |
2×63/1X126 |
2×63/1X126 |
2×90/1X180 |
4×50/2X100 |
40 |
60 |
|
Maximum speed back (Km/h) |
2×1.6 |
2×1.6 |
2×1.7 |
4×1 |
5 |
5 |
|
Maximum suitable conductor diameter(mm) |
Φ45 |
Φ45 |
Φ48.8 |
Φ42.5 |
Φ32 |
Φ40 |
|
Engine power/speed (KW/RPM) |
82.5/2500 |
82.5/2500 |
82.5/2500 |
82.5/2500 |
851/2500 |
82.5/2000 |
|
Dimensions(m) |
5.3×2.3×2.9 |
5.3×2.3×2.9 |
5.3×2.3×2.9 |
5.3×2.3×2.9 |
4.2×1.8×2.4 |
5.5×1.9×2.4 |
|
Weight(kg) |
8500 |
8500 |
10500 |
12000 |
3600 |
4800 |
Product detail pictures:
Related Product Guide:
Excellent 1st,and Client Supreme is our guideline to deliver the ideal provider to our prospects.Nowadays, we have been seeking our best to become certainly one of the most effective exporters in our discipline to meet shoppers more require for OEM Hand Winch Factory – BELT DRIVE VARIABLE SPEED WIRE ROPE TRACTION PULLING CABLE ELECTRIC POWER WINCH – Donghuan Power , The product will supply to all over the world, such as: Colombia, Hungary, Johannesburg, Our items are widely recognized and trusted by users and can meet continuously changing economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
By Erica from Vietnam - 2018.06.19 10:42
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Michelle from Kazakhstan - 2018.09.08 17:09
Related products
-
China wholesale FIve Sheave Block Manufacturer ...
Product introduction The aluminum sheave or the nylon sheave used as the base material, and the sheave groove is coated with rubber. Before coating, the groove surface of the aluminum sheave or the nylon sheave needs to be specially processed, Then the high temperature rubber pressing process is adopted, so that the rubber layer can be firmly adhered to the aluminum sheave or the nylon sheave. The purpose of aluminum sheave or the nylon sheave coating with rubber is that when the conductor is...
-
OEM Dupont Silk Rope Manufacturers – He...
Product introduction Anti twist steel wire rope is a special textile steel wire rope made of high-strength hot-dip galvanized high-quality steel wire through special processing. It is also called non rotating steel wire rope because its cross section is hexagonal and does not twist when stressed. Compared with ordinary round strand wire rope, it has the advantages of high strength, good flexibility, corrosion prevention and rust prevention, no gold hook, not easy to knot, long service life an...
-
OEM Wire Clips Metal Supplier – Aluminu...
Product introduction Aluminum Alloy Conductor Grippers are a commonly used wire holding tool in the construction and maintenance of electric power, telecommunications and railway electrification overhead lines.. The grippers is applicable to adjust sag and tension conductor during stringing. The grippers is forged from high-strength aluminum alloy, with small volume and light weight. All gripping jaws are produced with new technology to increase jaw life. The grippers are designed to be used...
-
China wholesale Electrical Wire Cutters Factory...
Product introduction The aluminum sheave or the nylon sheave used as the base material, and the sheave groove is coated with rubber. Before coating, the groove surface of the aluminum sheave or the nylon sheave needs to be specially processed, Then the high temperature rubber pressing process is adopted, so that the rubber layer can be firmly adhered to the aluminum sheave or the nylon sheave. The purpose of aluminum sheave or the nylon sheave coating with rubber is that when the conductor is...
-
OEM Hand Held Cable Cutters Manufacturer –...
Product introduction Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use. Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom. Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light a...
-
OEM Portable Wire Stripper Supplier – C...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...