OEM Hoisting Tackle Factory – CHAIN TYPE HANDLE HOIST lever Hoisting Hand hoist – Donghuan Power
OEM Hoisting Tackle Factory – CHAIN TYPE HANDLE HOIST lever Hoisting Hand hoist – Donghuan Power Detail:
Product introduction
1. The body is forging of high strength aluminum alloy with light weight and no damage to conductor.
2. Use multi-segment type bolts clamp structure, so the traction load is large. Not to slip line and hurt the line. Need to specify when ordering diameter and conductor models. The groove for wire clamping shall be processed according to the wire diameter. Select the number of slice that make up the product according to the traction load.
3. Apply to large cross-section conductor under UHV line and long span construction situation.
OPGW GRIPPER TECHNICAL PARAMETERS
|
Item number |
Model |
Rated Load (KN) |
Applicable Conductor Diameter (mm) |
Tightening Torque (N.m） |
Number of slice |
Weight (kg) |
|
13230L1 |
SK35DP1 |
90 |
Φ25-Φ35 |
150 |
9 |
17 |
|
13230L2 |
SK35DP2 |
120 |
Φ25-Φ35 |
150 |
11 |
19 |
|
13230L3 |
SK35DP3 |
150 |
Φ25-Φ35 |
150 |
13 |
21 |
|
13231L |
SK50DP2 |
150 |
Φ50（MAX） |
150 |
15 |
26 |
Product detail pictures:
Related Product Guide:
We take "customer-friendly, quality-oriented, integrative, innovative" as objectives. "Truth and honesty" is our management ideal for OEM Hoisting Tackle Factory – CHAIN TYPE HANDLE HOIST lever Hoisting Hand hoist – Donghuan Power , The product will supply to all over the world, such as: Porto, Lahore, Hyderabad, Our company offers the full range from pre-sales to after-sales service, from product development to audit the use of maintenance, based on strong technical strength, superior product performance, reasonable prices and perfect service, we'll continue to develop, to deliver the high-quality items and services, and promote lasting cooperation with our customers, common development and create a better future.
By Jonathan from United Kingdom - 2017.05.02 11:33
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
By Louise from Malawi - 2017.03.28 16:34
Related products
-
OEM Snatch Block Pulley Suppliers – Tra...
Product introduction The aluminum sheave or the nylon sheave used as the base material, and the sheave groove is coated with rubber. Before coating, the groove surface of the aluminum sheave or the nylon sheave needs to be specially processed, Then the high temperature rubber pressing process is adopted, so that the rubber layer can be firmly adhered to the aluminum sheave or the nylon sheave. The purpose of aluminum sheave or the nylon sheave coating with rubber is that when the conductor is...
-
OEM Manual Cable Stripper Factory – 660...
Product introduction This 660*100mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ660 × Φ560 × 100 (mm). Under normal circumstances，its maximum suitable conductor is ACSR500, which means that the aluminum of our conducting wire has the maximum cross section of 500 square millimeters. The maximum diameter through which the sheave passes is 75mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protecto...
-
China wholesale Single Sheave Snatch Block Supp...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...
-
China wholesale Rope Guide Pulley Factory ̵...
Product introduction Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use. Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom. Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light a...
-
OEM Clamp For Wire Cable Factory – Alum...
Product introduction Nylon wheel hoisting tackle is suitable for assemble and erect the tower,line construction,hoist devices and other hoist operation. The hoisting tackle group formed by the combination of hoisting tackle can change the direction of the traction wire rope of the hoisting tackle and the hoisting tackle group and lift or move moving objects for many times. Product is made of aluminum alloy side plate with MC nylon wheel, it has light weight. Easy to carry and hang. The wheel ...
-
OEM Winch Cable Pulley Manufacturer – H...
Product introduction The Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. According to the power adopted by the winch, it can b...