OEM Hydraulic Compressors Factory – Heavy Duty Crimp Cable Press-Fit Tool Split-Type Hydraulic Crimping Pliers – Donghuan Power
OEM Hydraulic Compressors Factory – Heavy Duty Crimp Cable Press-Fit Tool Split-Type Hydraulic Crimping Pliers – Donghuan Power Detail:
Product introduction
Hydraulic crimping pliers is a professional hydraulic tool suitable for crimping cables and terminals in power engineering.
The split hydraulic crimping pliers can be used with the hydraulic pump (the commonly used hydraulic pump is gasoline powered hydraulic pump or electric hydraulic pump, The output pressure of the hydraulic pump is ultra-high pressure, and the pressure reaches 80MPa.).
The specifications and models of hydraulic crimping pliers range from 60 tons to 300 tons, and customers can choose the appropriate model according to their needs. The selection principle of hydraulic crimping pliers is that large hydraulic crimping pliers can be used to crimp small-size crimping pipes, but small hydraulic crimping pliers cannot be used to crimp large-size crimping pipes, otherwise the crimping will be unstable.
The crimping die is selected according to the model of the hydraulic crimping pliers and the specification of the crimping pipe. Neither big nor small.
Hydraulic crimping pliers is suitable for the crimping of large-size crimping pipes. For power cable conductors, oil pressure copper and aluminum terminals and connecting tubes.
Tightly press on the 10kv-500kv high-voltage cable bushing, clamp the end, use hexagonal mold, crimp tightly, conduct electricity well, and it is not easy to fall off and conduct heat well.
Hydraulic Crimping Pliers Technical Parameters
|
Item number |
16103 |
16103A |
16104 |
16105 |
16106 |
|
Model |
YJD-600 |
YJD-1000 |
YJD-1250 |
YJD-2000 |
YJD-3000 |
|
Crimping force |
60T |
100T |
125T |
200T |
300T |
|
Crimping range |
14-55mm |
14-76mm |
14-76mm |
14-90mm |
14-100mm |
|
Crimping type |
hexagon crimping |
hexagon crimping |
|||
|
Stroke |
24mm |
24mm |
35mm |
35mm |
|
|
Heigth |
approx.370mm |
approx.480mm |
|||
|
Weight （KG） |
approx.N.W20KG G.W30KG |
approx.N.W30KG G.W40KG |
approx.N.W50KG G.W60KG |
approx.N.W85KG G.W95KG |
approx.N.W120KG G.W130KG |
|
Package |
wooden case |
wooden case |
|||
Product detail pictures:
Related Product Guide:
To regularly increase the management program by virtue from the rule of "sincerely, good religion and high quality are the base of enterprise development", we greatly absorb the essence of linked products internationally, and constantly produce new goods to satisfy the calls for of shoppers for OEM Hydraulic Compressors Factory – Heavy Duty Crimp Cable Press-Fit Tool Split-Type Hydraulic Crimping Pliers – Donghuan Power , The product will supply to all over the world, such as: Guatemala, Birmingham, South Korea, We are proud to supply our products and solutions to every costumer all around the world with our flexible, fast efficient services and strictest quality control standard which has always approved and praised by customers.
By Antonio from Portugal - 2018.06.28 19:27
Production management mechanism is completed, quality is guaranteed, high credibility and service let the cooperation is easy, perfect!
By Joyce from Jeddah - 2017.06.16 18:23
Related products
-
OEM Wire Rope Idler Pulley Manufacturers –...
Product introduction The product is used for the tensioning of various conductors, ground wires, OPGW and ADSS during tension setting out. Bull wheel with wear proof MC nylon lining segments. Infinitely variable tension control and constant tension conductor stringing. Spring applied hydraulic released brake acts automatically in case of hydraulic failure to ensu safety Attached two sets of hydraulic power output interface to connect hydraulic conductor reel stand. Hydraulic Traction with va...
-
OEM Five Sheave Pulley Block Factory – ...
Product introduction This 660*100mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ660 × Φ560 × 100 (mm). Under normal circumstances，its maximum suitable conductor is ACSR500, which means that the aluminum of our conducting wire has the maximum cross section of 500 square millimeters. The maximum diameter through which the sheave passes is 75mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protecto...
-
China wholesale Pulley Cable Wire Suppliers ...
Product introduction The Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. According to the power adopted by the winch, it can b...
-
OEM Electrical Wire Reel Stands Manufacturers &...
Product introduction As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip. The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire. Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diameter, traction load and use environment. When paying off in the air, the Mesh Socks...
-
China wholesale Cable Cutter And Stripper Suppl...
Product introduction The shackle is made of 40 chrome alloy steel. The safety factor is more than 3 times. It is suitable for lifting, towing, anchoring, tightening and other connections. D-type shackle is a special shackle for electric power construction,with small volume and light weight, large bearing weight and high safety factor. shackle TECHNICAL PARAMETERS Item number Model Rated Load (KN) Main Size (mm) Weight (kg) A B C D 17131 GXK-1 10 5...
-
OEM Heavy Duty Cable Winch Factory – AL...
Product introduction 1. The body is forging of high strength aluminum alloy with light weight and no damage to conductor. 2. Use multi-segment type bolts clamp structure, so the traction load is large. Not to slip line and hurt the line. Need to specify when ordering diameter and conductor models. The groove for wire clamping shall be processed according to the wire diameter. Select the number of slice that make up the product according to the traction load. 3. Apply to large cross-section c...