OEM Large Cable Rollers Manufacturer – Power Line Ground Cable Roller Nylon Or Aluminum Or Steel Sheave Cable Pulling Pulley – Donghuan Power
OEM Large Cable Rollers Manufacturer – Power Line Ground Cable Roller Nylon Or Aluminum Or Steel Sheave Cable Pulling Pulley – Donghuan Power Detail:
Product introduction
Cable rollers should always be used when pulling cables. Straight cable runs are pulled in using straight cable rollers suitably placed in the ground, avoid damaging cable surface sheath by friction between cable and ground. Straight cable runs are pulled in using straight cable rollers suitably placed in the cable trench to prevent the cable being dragged on the trench bottom or in mud. Cable roller spacing is dependent on cable type being laid and the cable pulling tension along the route. Leading cable rollers are used to support the cable over the entire drum width immediately before being pulled into the trench.
According to the ground environment and usage habits, the cable roller has three structures. Respectively: casting aluminum structure, steel plate structure and steel pipe structure. Steel pipe structures are also divided into simple and reinforced structures
Common cable pulley specifications include outer diameter 120mm* wheel width 130mm, outer diameter 140mm* wheel width 160mm, outer diameter 120mm* wheel width 200mm and outer diameter 140mm* wheel width 210mm, etc.
Nylon sheaves are represented by N letters.The rest are aluminum sheaves. The steel wheel needs to be customized.
Ground Cable Roller Technical Parameters
|
Item number |
Model |
Applicable Cabe（MM） |
Rated load (kN) |
Carrier Structure |
Weight (kg) |
|
21171 |
SHL1 |
≤ Φ150 |
5 |
Casting Aluminum |
5.4 |
|
21172 |
SHL1N |
5 |
3.6 |
||
|
21181 |
SHL1B |
≤ Φ150 |
5 |
Steel Plate |
5.5 |
|
21182 |
SHL1BN |
5 |
3.7 |
||
|
21183 |
SHL2BN |
≤ Φ160 |
5 |
5.5 |
|
|
21184 |
SHL3BN |
≤ Φ200 |
5 |
8.0 |
|
|
21191 |
SHL1G |
≤ Φ150 |
5 |
Steel Pipe |
5.1 |
|
21192 |
SHL1GN |
5 |
3.3 |
||
|
21193 |
SHL2GN |
≤ Φ160 |
5 |
6.5 |
|
|
21194 |
SHL3GN |
≤ Φ200 |
5 |
8.5 |
Product detail pictures:
Related Product Guide:
All we do is always associated with our tenet " Customer first, Trust first, devoting on the food packaging and environmental protection for OEM Large Cable Rollers Manufacturer – Power Line Ground Cable Roller Nylon Or Aluminum Or Steel Sheave Cable Pulling Pulley – Donghuan Power , The product will supply to all over the world, such as: Nigeria, Miami, Bangkok, Our focus on product quality, innovation, technology and customer service has made us one of undisputed leaders worldwide in the field. Bearing the concept of "Quality First, Customer Paramount, Sincerity and Innovation" in our mind, We have achieved great progress in the past years. Clients are welcomed to buy our standard products, or send us requests. You will be impressed by our quality and price. Please contact us now!
By olivier musset from Juventus - 2018.09.23 18:44
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Maureen from Austria - 2017.01.28 19:59
Related products
-
China wholesale Ratcheting Handheld Cable Cutte...
Product introduction This916mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ916 × Φ800 × 110 (mm). Under normal circumstances，its maximum suitable conductor is ACSR720, which means that the aluminum of our conducting wire has the maximum cross section of 720 square millimeters. The maximum diameter through which the sheave passes is 85mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protector is...
-
OEM Cable Pulley Rope Manufacturer – To...
Product introduction Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use. Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom. Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light a...
-
OEM Wire Holder Clamp Supplier – Wire L...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...
-
China wholesale Chain Winch Suppliers – ...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...
-
China wholesale Double Pulley Blocks Factory &#...
Product introduction Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use. Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom. Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light a...
-
OEM Traction Rope Supplier – High Speed...
Product introduction The Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. According to the power adopted by the winch, it can b...