OEM Nylon Pulley Wheels With Bearings Factory – Transmission Conductor Triple Aluminum Sheaves Neoprene Lined Stringing Pulley Block Aluminum Sheaves Coated with Rubber Stringing Block – Donghuan Power
OEM Nylon Pulley Wheels With Bearings Factory – Transmission Conductor Triple Aluminum Sheaves Neoprene Lined Stringing Pulley Block Aluminum Sheaves Coated with Rubber Stringing Block – Donghuan Power Detail:
Product introduction
The aluminum sheave or the nylon sheave used as the base material, and the sheave groove is coated with rubber. Before coating, the groove surface of the aluminum sheave or the nylon sheave needs to be specially processed, Then the high temperature rubber pressing process is adopted, so that the rubber layer can be firmly adhered to the aluminum sheave or the nylon sheave.
The purpose of aluminum sheave or the nylon sheave coating with rubber is that when the conductor is pulled through the sheave groove, the surface of the conductor and the pulley groove will generate friction, and the outer surface of the conductor will be damaged to a certain extent. The rubber coating on the aluminum sheave or the nylon sheave can reduce the damage caused by this friction.
Stringing block can be divided into single sheave, three sheaves and five sheaves according to the number of sheaves. According to sheave diameter, it can be divided into (outside diameter × sheave width) of Φ308×75, Φ408×80 and Φ508×75 (mm), etc. Sheave size can be customized according to needs. The number of sheaves can also be customized.
Product description
1. Rubber coated stinging block for conductor transmission line passing
2. Any sizes of stringing block（outside diameter*root diameter*sheave width） accept to customize
3.OEM and ODM service
4.Nylon sheaves or aluminum sheaves is coated with rubber (neoprene)
Hydraulic Traction Technical Parameters
|
Item Number |
Model |
Sheaves |
Sizes |
Rated Load |
Weight |
|
10241JS |
SHSLJ308 |
3 |
308×75mm |
35KN |
28KG |
|
10199JS |
SHSLJ408 |
3 |
408×80mm |
40KN |
35KG |
|
10102JS |
SHSLJ508 |
3 |
508×75mm |
40KN |
45KG |
Product detail pictures:
Related Product Guide:
The customer satisfaction is our primary goal. We uphold a consistent level of professionalism, quality, credibility and service for OEM Nylon Pulley Wheels With Bearings Factory – Transmission Conductor Triple Aluminum Sheaves Neoprene Lined Stringing Pulley Block Aluminum Sheaves Coated with Rubber Stringing Block – Donghuan Power , The product will supply to all over the world, such as: Turin, US, Curacao, With well educated, innovative and energetic staff, we are responsible for all elements of research, design, manufacture, sale and distribution. By studying and developing new techniques, we are not only following but also leading fashion industry. We listen attentively to the feedback from our customers and provide instant replies. You will instantly feel our professional and attentive service.
By ron gravatt from Poland - 2018.12.30 10:21
Product variety is complete, good quality and inexpensive, the delivery is fast and transport is security, very good, we are happy to cooperate with a reputable company!
By Edward from America - 2018.06.18 19:26
Related products
-
OEM Nylon Rope For Cable Pulling Manufacturers ...
Product introduction This 660*100mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ660 × Φ560 × 100 (mm). Under normal circumstances，its maximum suitable conductor is ACSR500, which means that the aluminum of our conducting wire has the maximum cross section of 500 square millimeters. The maximum diameter through which the sheave passes is 75mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protecto...
-
China wholesale Security Ground Anchor Manufact...
Product introduction Cable rollers should always be used when pulling cables. Straight cable runs are pulled in using straight cable rollers suitably placed in the ground, avoid damaging cable surface sheath by friction between cable and ground. Straight cable runs are pulled in using straight cable rollers suitably placed in the cable trench to prevent the cable being dragged on the trench bottom or in mud. Cable roller spacing is dependent on cable type being laid and the cable pulling tens...
-
China wholesale Big Cable Cutters Manufacturer ...
Product introduction This 508*75mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ508 × Φ408 × 75 (mm). Under normal circumstances，its maximum suitable conductor is ACSR400, which means that the aluminum of our conducting wire has the maximum cross section of 400 square millimeters. The maximum diameter through which the sheave passes is 55mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protector...
-
OEM Lever Chain Hoist Manufacturers – D...
Double drum winch is used in power transmission and distribution engineering, telephone construction tower erection, traction cable, line, hoisting tools , tower erection , pole setting,stringing wire in electrical power line construction, the winch is driven by a belt,effectively prevent the damage of overload. The double drum structure can reduce the damage of the wire rope during traction.The power of the winch can be diesel power or gasoline power as required.The model jjcs-50t double dru...
-
OEM Chain Block Hoist Factory – High Sp...
Product introduction The Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. According to the power adopted by the winch, it can b...
-
China wholesale Usb Cable Roller Supplier ̵...
Product introduction This 660*100mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ660 × Φ560 × 100 (mm). Under normal circumstances，its maximum suitable conductor is ACSR500, which means that the aluminum of our conducting wire has the maximum cross section of 500 square millimeters. The maximum diameter through which the sheave passes is 75mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protecto...