OEM Power Cable Clips Supplier – Wire Laying Construction Steel Cable Socks Mesh Sleeve Cable Net Sleeve Conductor Mesh Socks Joint – Donghuan Power
OEM Power Cable Clips Supplier – Wire Laying Construction Steel Cable Socks Mesh Sleeve Cable Net Sleeve Conductor Mesh Socks Joint – Donghuan Power Detail:
Product introduction
The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation.
The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction strength.
The inner core is made of 12 strands of twisted fiber, with high strength. The outer sheath is made of 24 strands of tightly woven, with good wear resistance.
The high tensile strength of high-strength traction rope can effectively improve the load. Its low elongation can effectively control the sag, making the sag drop as small as possible under load.
The good insulation and moisture-proof performance of high-strength traction rope can ensure the safety of personnel and equipment during live crossing construction.
The material of high-strength traction rope is light. Under the condition of the same breaking tensile strength, the weight per meter of high-strength traction rope is only 15% of that of steel wire rope. The use of high-strength traction rope is conducive to reducing labor intensity and improving work efficiency.
The high-strength traction rope has good bending fatigue resistance, wear resistance, weather resistance, UV protection, chemical corrosion resistance and other characteristics, which is conducive to recycling in the crossing construction.
High strength braided nylon rope TECHNICAL PARAMETERS
Nylon material
|
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
|
6 |
8.6 |
20±0.3 |
16 |
41.6 |
153±1.5 |
|
8 |
12.8 |
44±0.5 |
18 |
51.2 |
193±2 |
|
10 |
17.6 |
63±1 |
20 |
60.8 |
222±3 |
|
12 |
24 |
93±1 |
22 |
70.4 |
268±3 |
|
14 |
32.3 |
117±1.5 |
24 |
80 |
318±4 |
DuPont silk material
|
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
|
6 |
10 |
35±0.3 |
14 |
60 |
148±1.5 |
|
8 |
16 |
60±0.5 |
16 |
80 |
180±1.5 |
|
10 |
30 |
80±1 |
18 |
100 |
230±2 |
|
12 |
50 |
114±1 |
20 |
120 |
290±3 |
Dinima material
|
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
|
6 |
19 |
16±0.3 |
14 |
137 |
113±1.5 |
|
8 |
31.9 |
28±0.5 |
16 |
180 |
150±1.5 |
|
10 |
58.8 |
48±1 |
18 |
211 |
177±2 |
|
12 |
92.5 |
77±1 |
21 |
296 |
247±3 |
Product detail pictures:
Related Product Guide:
We take "customer-friendly, quality-oriented, integrative, innovative" as objectives. "Truth and honesty" is our administration ideal for OEM Power Cable Clips Supplier – Wire Laying Construction Steel Cable Socks Mesh Sleeve Cable Net Sleeve Conductor Mesh Socks Joint – Donghuan Power , The product will supply to all over the world, such as: Nigeria, Kuala Lumpur, Roman, We adopt advanced production equipment and technology, and perfect testing equipment and methods to ensure our product quality. With our high-level talents, scientific management, excellent teams, and attentive service, our merchandise are favored by domestic and foreign customers. With your support, we'll build a better tomorrow!
By John biddlestone from Iraq - 2018.05.13 17:00
After the signing of the contract, we received satisfactory goods in a short term, this is a commendable manufacturer.
By Gill from Cannes - 2017.05.02 11:33
Related products
-
China wholesale Cable Cutter Supplier – ...
Product introduction The product is used for the tensioning of various conductors, ground wires, OPGW and ADSS during tension setting out. Bull wheel with wear proof MC nylon lining segments. Infinitely variable tension control and constant tension conductor stringing. Spring applied hydraulic released brake acts automatically in case of hydraulic failure to ensu safety Attached two sets of hydraulic power output interface to connect hydraulic conductor reel stand. Hydraulic Traction with va...
-
China wholesale Armoured Cable Cutting Tools Fa...
Product introduction This916mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ916 × Φ800 × 110 (mm). Under normal circumstances，its maximum suitable conductor is ACSR720, which means that the aluminum of our conducting wire has the maximum cross section of 720 square millimeters. The maximum diameter through which the sheave passes is 85mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protector is...
-
China wholesale Usb Cable Roller Manufacturer &...
Product introduction Cable rollers should always be used when pulling cables. Straight cable runs are pulled in using straight cable rollers suitably placed in the ground, avoid damaging cable surface sheath by friction between cable and ground. Straight cable runs are pulled in using straight cable rollers suitably placed in the cable trench to prevent the cable being dragged on the trench bottom or in mud. Cable roller spacing is dependent on cable type being laid and the cable pulling tens...
-
OEM Small Hand Crank Winch Factory – Hi...
Product introduction The Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. According to the power adopted by the winch, it can b...
-
OEM Clamp For Wire Cable Manufacturer – ...
Product introduction 1. The body is forging of high strength aluminum alloy with light weight and no damage to conductor. 2. Use multi-segment type bolts clamp structure, so the traction load is large. Not to slip line and hurt the line. Need to specify when ordering diameter and conductor models. The groove for wire clamping shall be processed according to the wire diameter. Select the number of slice that make up the product according to the traction load. 3. Apply to large cross-section c...
-
China wholesale Insulating Rope Factory –...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...