OEM Ratchet Hoist Mechanism Factory – A-Shape Tubular Electric Power Gin Pole Stringing Equipment Aluminum Extension Pole A-Shape Tubular Gin Pole – Donghuan Power
OEM Ratchet Hoist Mechanism Factory – A-Shape Tubular Electric Power Gin Pole Stringing Equipment Aluminum Extension Pole A-Shape Tubular Gin Pole – Donghuan Power Detail:
Product introduction
Used for transmission and distribution line engineering, sling tower material, positioning pulley set use. assembling power stringing tower.
The main material adopts high strength aluminum alloy pipe, rivet joint makes, portable and durable.
It is mainly made of high-strength aluminum alloy pipes of 2 specifications.
The specifications are: outer diameter 150mm * thickness 6mm and outer diameter 120mm * thickness 7mm.
The head part of the Gin Poles is inverted, and The base part of the gin pole is square.
The safety factor is 2.5.
Manual winch can be added. The maximum output force of manual winch is 5KN.
A-Shape Tubular Gin Pole TECHNICAL PARAMETERS
|
Item number |
Model |
Length （m） |
Diameter*wall （mm） |
Vertical Load （KN） |
Safety Factor （K） |
Weight （kg/m） |
|
03311 |
LBGR120A |
6-9 |
120×7 |
17-30 |
2.5 |
7.5 |
|
03321 |
LBGR150A |
8-13 |
150×6 |
13-31 |
2.5 |
8 |
The main material of aluminum alloy A-shaped holding pole is high-strength aluminum alloy, which is safe, reliable and light.
The lifting tool of the pole erecting machine does not need to anchor, and the safety factor is high.
Three people can complete the tool assembly and pole erecting, and the lifting task can be easily completed with the help of double speed winch.
This product is small in size, light in weight, flexible in application, convenient and safe, and high in coefficient.
It can solve the problem that cranes cannot enter the site and that the danger of manual pole erection is great.
The construction in urban hutong or hilly areas in the middle of mountains can better reflect its characteristics.
The whole pole erection process only needs a few people to complete in a short period of more than ten minutes.
Product detail pictures:
Related Product Guide:
Sticking for the principle of "Super Quality, Satisfactory service" ,We have been striving for being a superb small business partner of you for OEM Ratchet Hoist Mechanism Factory – A-Shape Tubular Electric Power Gin Pole Stringing Equipment Aluminum Extension Pole A-Shape Tubular Gin Pole – Donghuan Power , The product will supply to all over the world, such as: Japan, Bangalore, Turin, We have top engineers in these industries and an efficient team in the research. What is more, we have our own archives mouths and markets in China at low cost. Therefore, we can meet different inquiries from different clients. Please find our website to check more information from our products.
By Meroy from California - 2017.01.28 18:53
Good quality, reasonable prices, rich variety and perfect after-sales service, it's nice!
By Irma from Belgium - 2017.03.28 16:34
Related products
-
OEM Hydrashear Wire Rope Cutter Factory –...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...
-
OEM Hand Winch Handle Suppliers – Tower...
Product introduction Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use. Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom. Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light a...
-
China wholesale Pulley Block With Hook Manufact...
Product introduction As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip. The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire. Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diameter, traction load and use environment. When paying off in the air, the Mesh Socks...
-
China wholesale Cable Stripping And Crimping To...
Product introduction In the harsh environment such as mountains, valleys and rivers, it is not convenient to manually lay the guide rope on the ground, the helicopter can be used to pull the guide rope and directly hang it in the pulley groove of the Aerial Helicopter Stringing Pulley. Convenient for subsequent wire laying. The guide rope enters the pulley groove through the guide rope guide arm, eccentric rotating door and other mechanisms in the Aerial Helicopter Stringing Pulley. The Aeria...
-
China wholesale Three Sheave Pulley Block Suppl...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...
-
China wholesale Aerial Cable Cutter Manufacture...
Product introduction This 660*100mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ660 × Φ560 × 100 (mm). Under normal circumstances，its maximum suitable conductor is ACSR500, which means that the aluminum of our conducting wire has the maximum cross section of 500 square millimeters. The maximum diameter through which the sheave passes is 75mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protecto...