OEM Small Hydraulic Puller Factory – Heavy Duty Crimp Cable Press-Fit Tool Split-Type Hydraulic Crimping Pliers – Donghuan Power
OEM Small Hydraulic Puller Factory – Heavy Duty Crimp Cable Press-Fit Tool Split-Type Hydraulic Crimping Pliers – Donghuan Power Detail:
Product introduction
Hydraulic crimping pliers is a professional hydraulic tool suitable for crimping cables and terminals in power engineering.
The split hydraulic crimping pliers can be used with the hydraulic pump (the commonly used hydraulic pump is gasoline powered hydraulic pump or electric hydraulic pump, The output pressure of the hydraulic pump is ultra-high pressure, and the pressure reaches 80MPa.).
The specifications and models of hydraulic crimping pliers range from 60 tons to 300 tons, and customers can choose the appropriate model according to their needs. The selection principle of hydraulic crimping pliers is that large hydraulic crimping pliers can be used to crimp small-size crimping pipes, but small hydraulic crimping pliers cannot be used to crimp large-size crimping pipes, otherwise the crimping will be unstable.
The crimping die is selected according to the model of the hydraulic crimping pliers and the specification of the crimping pipe. Neither big nor small.
Hydraulic crimping pliers is suitable for the crimping of large-size crimping pipes. For power cable conductors, oil pressure copper and aluminum terminals and connecting tubes.
Tightly press on the 10kv-500kv high-voltage cable bushing, clamp the end, use hexagonal mold, crimp tightly, conduct electricity well, and it is not easy to fall off and conduct heat well.
Hydraulic Crimping Pliers Technical Parameters
|
Item number |
16103 |
16103A |
16104 |
16105 |
16106 |
|
Model |
YJD-600 |
YJD-1000 |
YJD-1250 |
YJD-2000 |
YJD-3000 |
|
Crimping force |
60T |
100T |
125T |
200T |
300T |
|
Crimping range |
14-55mm |
14-76mm |
14-76mm |
14-90mm |
14-100mm |
|
Crimping type |
hexagon crimping |
hexagon crimping |
|||
|
Stroke |
24mm |
24mm |
35mm |
35mm |
|
|
Heigth |
approx.370mm |
approx.480mm |
|||
|
Weight （KG） |
approx.N.W20KG G.W30KG |
approx.N.W30KG G.W40KG |
approx.N.W50KG G.W60KG |
approx.N.W85KG G.W95KG |
approx.N.W120KG G.W130KG |
|
Package |
wooden case |
wooden case |
|||
Product detail pictures:
Related Product Guide:
Our growth depends around the superior machines, exceptional talents and consistently strengthened technology forces for OEM Small Hydraulic Puller Factory – Heavy Duty Crimp Cable Press-Fit Tool Split-Type Hydraulic Crimping Pliers – Donghuan Power , The product will supply to all over the world, such as: Argentina, Amsterdam, United Arab emirates, The company has perfect management system and after-sales service system. We devote ourselves to building a pioneer in the filter industry. Our factory is willing to cooperate with different customers domestic and overseas to gain better and better future.
By Maud from Swansea - 2017.09.09 10:18
This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
By ron gravatt from Afghanistan - 2018.11.28 16:25
Related products
-
China wholesale Heavy Duty Pulley Factory ̵...
Product introduction The Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. According to the power adopted by the winch, it can b...
-
China wholesale Wire Spool Roller Suppliers ...
Product introduction Cable rollers should always be used when pulling cables. Straight cable runs are pulled in using straight cable rollers suitably placed in the ground, avoid damaging cable surface sheath by friction between cable and ground. Straight cable runs are pulled in using straight cable rollers suitably placed in the cable trench to prevent the cable being dragged on the trench bottom or in mud. Cable roller spacing is dependent on cable type being laid and the cable pulling tens...
-
OEM Braided Nylon Cord Suppliers – Cust...
Product introduction This 660*100mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ660 × Φ560 × 100 (mm). Under normal circumstances，its maximum suitable conductor is ACSR500, which means that the aluminum of our conducting wire has the maximum cross section of 500 square millimeters. The maximum diameter through which the sheave passes is 75mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protecto...
-
OEM Wire Ratchet Tighte Supplier – Dies...
Double drum winch is used in power transmission and distribution engineering, telephone construction tower erection, traction cable, line, hoisting tools , tower erection , pole setting,stringing wire in electrical power line construction, the winch is driven by a belt,effectively prevent the damage of overload. The double drum structure can reduce the damage of the wire rope during traction.The power of the winch can be diesel power or gasoline power as required.The model jjcs-50t double dru...
-
China wholesale Manual Rope Hoist Manufacturers...
Product introduction Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use. Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom. Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light a...
-
OEM Heavy Duty Nylon Rope Factory – Wir...
Product introduction As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip. The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire. Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diameter, traction load and use environment. When paying off in the air, the Mesh Socks...