ALUMINIUM CONDUCTORS ACSR TWO THREE FOUR SIX BUNDLED CONDUCTORS LIFTER

Short Description:

CONDUCTORS LIFTER is used to lift the bundled wires. it is used lifting tackle to balance lifting hook height. Double conductor lifters are used for lifting double bundled conductors, three conductor lifters are used for lifting triple bundled conductors, four conductor lifters or two groups of double conductor lifters are used for lifting four bundled conductors, and six conductor lifters or three groups of double conductor lifters or one group of four conductor lifters combined with one group of double conductor lifters are used for lifting six bundled conductors.


Product Detail

Product Tags

Product introduction 

1. CONDUCTORS LIFTER is used to lift the bundled wires. it is used lifting tackle to balance lifting hook height. Double conductor lifters are used for lifting double bundled conductors, three conductor lifters are used for lifting triple bundled conductors, four conductor lifters or two groups of double conductor lifters are used for lifting four bundled conductors, and six conductor lifters or three groups of double conductor lifters or one group of four conductor lifters combined with one group of double conductor lifters are used for lifting six bundled conductors.

2.The lifting hooks are made of alloy steel.  Steel hook groove is covered with rubber or nylon.

3.High wear-resistant lifting wheel Applicatoin Suitable for lifting conductors when erecting split conductor during construction

CONDUCTORS LIFTER TECHNICAL PARAMETERS

Item number

Model

Rated Load

(KN)

Hook slot length

(mm)

Weight

kg

Lifting hook

19112

ST25-2

2x12

120

13

Two

19113

ST50-2

2x15

160

25

 Two

19114

ST80-2

2x40

250

40

 Two

19108

ST36-3

3x12

120

21

 Three

19109

ST75-3

3x25

160

35

 Three

19110

ST120-3

3x40

250

60

 Three

19115

ST48-4

4x12

120

35

 Four

19116

ST100-4

4x25

160

60

 Four

19117

ST160-4

4x40

250

90

 Four

19118A

ST150-6

6x25

160

70

Sex

19118B

ST240-6

6x40

250

110

 Sex

19119A

ST200-8

8x25

160

120

Eight

19119B

ST320-8

5+6

250

160

Eight

10-6
d1a410c3d14e9744ccc0562e998b2e5

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Electrician Safety Belt Harness Anti-fall Body Safety Rope Safety Belt

      Electrician Safety Belt Harness Anti-fall Body ...

      Product introduction  The safety belt is a personal protection product against falling. Personal protective equipment to prevent workers from falling or hang them safely after falling. According to different conditions of use, it can be divided into 1. Safety belt for fence work A safety belt used to bind the human body near the fixed structure by ropes or belts around the fixed structure so that the operator's hands can perform other operations. 2. Fall arrest harne...

    • CABLE ROLLER WHEEL PULLEY NYLON ALUMINIUM ALLOY SINGLE STRINGING PULLEY

      CABLE ROLLER WHEEL PULLEY NYLON ALUMINIUM ALLOY...

      Product introduction  Apply to pull conductor on straight pole.Splicing sleeve,steel wire rope and connector can pass through the groove. Pulley Block With Hook Single Sheave is used for releasing the aluminum wire, ACSR, insulated wire in pole and tower erection. The wheel groove can be through with clamp pipe, aluminum tube, connector etc.. The material is aluminum alloy and MC nylon . Pulley pendant is combined plate and hook type. The stringing roller is suitable...

    • EXTERNAL ALUMINUM STRANDS OF CONDUCTOR KNIFE Aluminum Strand Stripper

      EXTERNAL ALUMINUM STRANDS OF CONDUCTOR KNIFE Al...

      Product introduction  Manual aluminum strand stripper, outer layer of aluminum stripper for 240-900mm2 is applied to strip the outer layer of aluminum before crimping ACSR.The surface of cutting is flat. And the aluminum strand stripper don't hurt the steel core. The aluminum strands are separated by rotary cutting. During rotary cutting, keep the uncut aluminum strand clamped to prevent the aluminum strand from loosening and deformation. aluminum strand str...

    • Dual Cam Gripper Earth Wire Come Along Clamp Dual Cam Earth Wire Gripper

      Dual Cam Gripper Earth Wire Come Along Clamp Du...

      Product introduction  Earth Wire Gripper is suitable for the steel strand adjustment of the guyed tower and the ground wire tightening. 1. Small size and light weight,easy to use. 2.Light and handy flexible. 3.Best Quality, safety,long life-span. 4. All gripping jaws are produced with new technology to increase jaw life. 5. The double cam structure is adopted to make the wire grip more firm, and the steel strand is not easy to loose and fall off. Dual Cam E...

    • UNIVERSAL STEEL PILE TO ANCHOR TEMPORARILY IN LINE CONSTRUCTION

      UNIVERSAL STEEL PILE TO ANCHOR TEMPORARILY IN L...

      Product introduction General steel piles are divided into steel pipe piles, angle steel piles, and round steel piles. The characteristics of steel piles are: (1) light weight, good rigidity, convenient loading, unloading, transportation, and stacking, and not easily damaged; (2) High bearing capacity. Due to the high strength of steel, it can effectively penetrate into hard soil layers, making the pile body less prone to damage and achieving great single pile bearing...

    • Stringing Block Special Block press rising wire pressing pulley Hold Down pulley

      Stringing Block Special Block press rising wire...

      Product introduction  When paying off in high mountains and mountains, the height difference between iron towers is large, so it is very easy for the traction rope, conductor or ground wire to slip out of the paying off pulley groove when it is rised. The pressing pulley is mainly used to press the rising traction rope, conductor or ground wire during paying off. When it is applicable to wire rope or steel strand, the pulley is made of steel wheel. When applicable to...