China wholesale Ground Wire Clamp Factory – Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power
China wholesale Ground Wire Clamp Factory – Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power Detail:
Product introduction
As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip.
The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire.
Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diameter, traction load and use environment.
When paying off in the air, the Mesh Socks Joint is used to hold the traction conductor tightly. Also used for cable pulling hoisting, the Mesh Socks Joint is used for buried or pipe traction on ground power cables. It can pass all kinds of pay-off pulley.
The usage is as follows: First press the opening of the Mesh Socks Joint with the palm of your hand to open it, then start to wear the cable inward. The deeper the cable is worn, the greater the pulling force. The mesh body of the Mesh Socks Joint is in the form of a grid, and the tension is tightened during construction. After the construction is completed, you only need to apply force in the opposite direction to remove the Mesh Socks Joint. The Mesh Socks Joint can be pulled by hand or lifting tool to achieve the function of wiring and protecting the cable.
The Mesh Socks Joint is used together with the Swivel Joint to release the twisting force.
We can also be customized according to customer requirements, such as single side pulling Mesh Socks Joint, double side pulling Mesh Socks Joint and wrapping Mesh Socks Joint.
Cable Mesh Socks Joint TECHNICAL PARAMETERS
|
Item number |
Model |
Applicable Cable Diameter (mm) |
Rated Load (KN) |
Weight (kg) |
|
21361 |
SWL-16 |
Φ12-16 |
10 |
0.8 |
|
21362 |
SWL-20 |
Φ16-20 |
10 |
0.8 |
|
21363 |
SWL-25 |
Φ20-25 |
15 |
1.0 |
|
21364 |
SWL-37 |
Φ25-37 |
15 |
1.0 |
|
21365 |
SWL-50 |
Φ37-50 |
15 |
1.0 |
|
21366` |
SWL-60 |
Φ50-60 |
25 |
2.4 |
|
21367 |
SWL-80 |
Φ60-80 |
25 |
2.4 |
|
21368 |
SWL-100 |
Φ80-100 |
25 |
2.4 |
|
21369 |
SWL-120 |
Φ100-120 |
30 |
2.6 |
|
21370 |
SWL-150 |
Φ120-150 |
30 |
2.6 |
|
21371 |
WT-100 |
Φ88-100 |
100 |
3.5 |
|
21371A |
WT-115 |
Φ100-115 |
100 |
3.5 |
|
21371B |
WT-130 |
Φ115-130 |
100 |
4 |
|
21371C |
WT-150 |
Φ130-150 |
100 |
4.5 |
|
21371D |
WT-180 |
Φ150-180 |
100 |
5 |
|
21372 |
WT-185 |
Φ180 |
200 |
6 |
|
21373 |
WT-240 |
Φ240 |
300 |
8 |
|
21374 |
WT-250 |
Φ250 |
300 |
8 |
|
21375 |
WT-280 |
Φ280 |
300 |
9 |
Product detail pictures:
Related Product Guide:
We strive for excellence, services the customers", hopes to be the top cooperation team and dominator business for personnel, suppliers and prospects, realizes benefit share and continual promotion for China wholesale Ground Wire Clamp Factory – Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power , The product will supply to all over the world, such as: Korea, Peru, Hongkong, We firmly think that we have the full capability to give you contented merchandise. Wish to collect concerns within you and build a new long-term synergy romantic relationship. We all significantly promise:Csame excellent, better selling price; exact selling price, better quality.
By Annabelle from Hungary - 2017.12.31 14:53
The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
By Dee Lopez from Swaziland - 2017.09.28 18:29
Related products
-
OEM Hydraulic Wire Cutter Manufacturer – ...
Product introduction The product is used for the tensioning of various conductors, ground wires, OPGW and ADSS during tension setting out. Bull wheel with wear proof MC nylon lining segments. Infinitely variable tension control and constant tension conductor stringing. Spring applied hydraulic released brake acts automatically in case of hydraulic failure to ensu safety Attached two sets of hydraulic power output interface to connect hydraulic conductor reel stand. Hydraulic Traction with va...
-
OEM Hydraulic Line Crimping Tool Factory –...
Product introduction Hydraulic crimping pliers is a professional hydraulic tool suitable for crimping cables and terminals in power engineering. The split hydraulic crimping pliers can be used with the hydraulic pump (the commonly used hydraulic pump is gasoline powered hydraulic pump or electric hydraulic pump, The output pressure of the hydraulic pump is ultra-high pressure, and the pressure reaches 80MPa.). The specifications and models of hydraulic crimping pliers range from 60 tons to 30...
-
OEM Wire Cable Hoist Supplier – Diesel ...
Double drum winch is used in power transmission and distribution engineering, telephone construction tower erection, traction cable, line, hoisting tools , tower erection , pole setting,stringing wire in electrical power line construction, the winch is driven by a belt,effectively prevent the damage of overload. The double drum structure can reduce the damage of the wire rope during traction.The power of the winch can be diesel power or gasoline power as required.The model jjcs-50t double dru...
-
China wholesale Chain Hoist Motor Manufacturers...
Product introduction Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use. Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom. Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light a...
-
OEM Five Sheave Manufacturer – Cable Pu...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...
-
OEM Electric Cable Cutter Tools Suppliers ̵...
Product introduction Hydraulic crimping pliers is a professional hydraulic tool suitable for crimping cables and terminals in power engineering. The split hydraulic crimping pliers can be used with the hydraulic pump (the commonly used hydraulic pump is gasoline powered hydraulic pump or electric hydraulic pump, The output pressure of the hydraulic pump is ultra-high pressure, and the pressure reaches 80MPa.). The specifications and models of hydraulic crimping pliers range from 60 tons to 30...