OEM Hydraulic Wire Cutter Manufacturer – TRANSMISSION LINE HYDRAULIC TENSIONING STRINGING EQUIPMENT FOR OVERHEAD TRANS MISSION LINE CONSTRUCTION – Donghuan Power
OEM Hydraulic Wire Cutter Manufacturer – TRANSMISSION LINE HYDRAULIC TENSIONING STRINGING EQUIPMENT FOR OVERHEAD TRANS MISSION LINE CONSTRUCTION – Donghuan Power Detail:
Product introduction
The product is used for the tensioning of various conductors, ground wires, OPGW and ADSS during tension setting out.
Bull wheel with wear proof MC nylon lining segments.
Infinitely variable tension control and constant tension conductor stringing.
Spring applied hydraulic released brake acts automatically in case of hydraulic failure to ensu safety
Attached two sets of hydraulic power output interface to connect hydraulic conductor reel stand.
Hydraulic Traction with various traction loads ranging from 3 tons to 42 tons have a complete range.
Engine : Cummins water cooled diesel engine.
Main variable pump and main motor :Rexroth (BOSCH)
Reducer :Rexroth (BOSCH)
Main hydraulic valve : Rexroth (BOSCH)
Matched reel:GSP1100-1400
Hydraulic TENSIONING TECHNICAL PARAMETERS
|
Item number |
07212 |
07155 |
07171 |
07181 |
07192 |
07197 |
|
Model |
SA-YZM7.5 |
SA-YZ30A |
SA-YZ40A |
SA-YZ2x35 |
SA-YZ2x40B |
SA-YZ2x55 |
|
Maximum Tension(KN) |
7.5 |
30 |
40 |
2×35/1×70 |
2×40/1×80 |
2×55/1×110 |
|
Continuous Tension(KN) |
7.5 |
25 |
35 |
2×30/1×60 |
2×35/1×70 |
2×50/1×100 |
|
Maximum speed(Km/h) |
40m/min |
5 |
5 |
5 |
5 |
5 |
|
Bottom of groovr diamere(mm) |
Φ1100 |
Φ1200 |
Φ1200 |
Φ1200 |
Φ1500 |
Φ1600 |
|
Number of groovr |
/ |
5 |
5 |
2×5 |
2×5 |
2×5 |
|
Maximum pull-back(KN) |
/ |
20 |
40 |
2×30/1X60 |
2×40/1X80 |
2×50/1X100 |
|
Maximum speed back (Km/h) |
/ |
/ |
3 |
2×2.1 |
2×1.5 |
2×2.1 |
|
Maximum suitable conductor diameter(mm) |
/ |
Φ32 |
Φ32 |
Φ32 |
Φ40 |
Φ42.5 |
|
Engine power/speed (KW/RPM) |
/ |
11/2200 |
37/2800 |
51/2500 |
51/2500 |
54/2500 |
|
Dimensions(m) |
2.3×1.2×1.6 |
3.6×1.8×2.4 |
3.4×1.8×2.4 |
4.4×2.1×2.6 |
4.5×2.2×2.8 |
5.0×2.3×2.7 |
|
Weight(kg) |
450 |
1700 |
2800 |
4000 |
4850 |
7500 |
|
Item number |
7198 |
7199 |
7201 |
7208 |
7223 |
7228 |
|
Model |
SA-YZ2x70 |
SA-YZ2x80 |
SA-YZ2x90 |
SA-YZ4x50 |
SA-YQZ40D |
SSA-YQZ60 |
|
Maximum Tension(KN) |
2×70/1×140 |
2×80/1×160 |
2×90/1×180 |
4×50/2×100 |
40 |
60 |
|
Continuous Tension(KN) |
2×65/1×130 |
2×70/1×140 |
2×80/1×160 |
4×45/2×90 |
35 |
35 |
|
Maximum speed(Km/h) |
5 |
5 |
5 |
5 |
5 |
5 |
|
Bottom of groovr diamere(mm) |
Φ1700 |
Φ1700 |
Φ1700 |
Φ1600 |
Φ1200 |
Φ150 |
|
Number of groovr |
2×5 |
2×5 |
2×6 |
4×5 |
5 |
6 |
|
Maximum pull-back(KN) |
2×63/1X126 |
2×63/1X126 |
2×90/1X180 |
4×50/2X100 |
40 |
60 |
|
Maximum speed back (Km/h) |
2×1.6 |
2×1.6 |
2×1.7 |
4×1 |
5 |
5 |
|
Maximum suitable conductor diameter(mm) |
Φ45 |
Φ45 |
Φ48.8 |
Φ42.5 |
Φ32 |
Φ40 |
|
Engine power/speed (KW/RPM) |
82.5/2500 |
82.5/2500 |
82.5/2500 |
82.5/2500 |
851/2500 |
82.5/2000 |
|
Dimensions(m) |
5.3×2.3×2.9 |
5.3×2.3×2.9 |
5.3×2.3×2.9 |
5.3×2.3×2.9 |
4.2×1.8×2.4 |
5.5×1.9×2.4 |
|
Weight(kg) |
8500 |
8500 |
10500 |
12000 |
3600 |
4800 |
Product detail pictures:
Related Product Guide:
In the past few years, our company absorbed and digested advanced technologies both at home and abroad. Meanwhile, our company staffs a team of experts devoted to the development of OEM Hydraulic Wire Cutter Manufacturer – TRANSMISSION LINE HYDRAULIC TENSIONING STRINGING EQUIPMENT FOR OVERHEAD TRANS MISSION LINE CONSTRUCTION – Donghuan Power , The product will supply to all over the world, such as: Malaysia, kazakhstan, Liverpool, Due to the stability of our items, timely supply and our sincere service, we are able to sell our merchandise not only over the domestic market, but also exported to countries and regions, including the Middle East, Asia, Europe and other countries and regions. At the same time, we also undertake OEM and ODM orders. We will do our best to serve your company, and establish a successful and friendly cooperation with you.
By Meroy from Kuwait - 2017.05.02 18:28
It's really lucky to find such a professional and responsible manufacturer, the product quality is good and delivery is timely, very nice.
By Queena from London - 2017.03.28 12:22
Related products
-
OEM Conductor Cutter Suppliers – Overhe...
Product introduction Overhead line Conductor Inspection Trolley is used to install accessories and overhaul on Conductor,ect. According to the number of applicable conductors, it is divided into Single Conductor Inspection Trolley, Double Conductor Inspection Trolley and Four Conductor Inspection Trolley. According to the structural form, it is divided into Simple Conductor Inspection Trolley, Bicycle Conductor Inspection Trolley and Frame Conductor Inspection Trolley. Simple Conductor Inspec...
-
OEM Five Sheave Manufacturer – 1040mm L...
Product introduction This1040mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ1040 × Φ900 × 125 (mm). Under normal circumstances，its maximum suitable conductor is ACSR1120, which means that the aluminum of our conducting wire has the maximum cross section of 1120 square millimeters. The maximum diameter through which the sheave passes is105mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protecto...
-
China wholesale Overlash Cable Rollers Factory ...
Product introduction This 660*100mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ660 × Φ560 × 100 (mm). Under normal circumstances，its maximum suitable conductor is ACSR500, which means that the aluminum of our conducting wire has the maximum cross section of 500 square millimeters. The maximum diameter through which the sheave passes is 75mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protecto...
-
OEM Crimping Machine For Cable Suppliers –...
Product introduction Hydraulic crimping pliers is a professional hydraulic tool suitable for crimping cables and terminals in power engineering. The split hydraulic crimping pliers can be used with the hydraulic pump (the commonly used hydraulic pump is gasoline powered hydraulic pump or electric hydraulic pump, The output pressure of the hydraulic pump is ultra-high pressure, and the pressure reaches 80MPa.). The specifications and models of hydraulic crimping pliers range from 60 tons to 30...
-
China wholesale Small Chain Hoist Factory ̵...
Product introduction The Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. According to the power adopted by the winch, it can b...
-
OEM Power Cable Clips Supplier – Wire L...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...