ACSR Steel Strand CHAIN TYPE Cutting Tools Manual CHAIN Conductor Cutter
Product introduction
The conductor cutter is used to cut off various conductor and steel strand. The maximum cut conductor diameter is 35 mm.
1.Cutting the ACSR or steel strand. Type selection shall be based on outer diameter. See the cutting range in the parameter table for details.
2.Because of its light weight, it is easy to carry. It can even be operated with only one hand.
3.The conductor cutter has convenient operation, is labor saving and safe and can not damage conductor and human bodies.
4.Chains and sprockets feed structure and lengthened handle are adopted, with large cutting force and fast cutting speed.
5.The blades are manufactured from high strength special steel, heat treated to ensure a long service life.
6.No cutting of Steel rod, wire rope, armoured cable, copper-aluminium cable is allowed. Do not exceed the shear range.
CHAIN conductor Cutter TECHNICAL PARAMETERS
|
Item number |
Model |
Cutting Range |
Weight(kg) |
|
16271 |
SDG-1 |
Cutting ACSR with section below 400mm². Cutting steel strand with section below 80 mm². |
5 |
|
16272 |
SDG-2 |
Cutting ACSR with section below 630mm². Cutting steel strand with section below 100 mm². |
5 |
Related products
-
Wire Laying Steel Cable Socks Mesh Sleeve Net O...
Product introduction The OPGW Mesh Socks Joint is used to hold the traction OPGW tightly. As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip. The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire. Different materials, wires with different diameters and different weaving methods can be customized according to the OPG...
-
TRIANGULAR SECTION HORIZONTAL PLATFORM STRUCTUR...
Product introduction The hanging ladder can be used for corner tower hanging operations, etc. When hanging a ladder horizontally, one end of the ladder is hung on the cross arm angle iron, and the other end of the ladder is hung on the wire. Hanging ladders can also be used vertically. Item No [L] [A] [B] [B1] [C] [D] m mm mm mm mm mm 22251 1.5 220 900 100 320 320 22252 2.5 220 900 100 320 320 22253 3 220 900 100 320 320 22255 10 220 ...
-
Electrician Safety Belt Harness Anti-fall Body ...
Product introduction The safety belt is a personal protection product against falling. Personal protective equipment to prevent workers from falling or hang them safely after falling. According to different conditions of use, it can be divided into 1. Safety belt for fence work A safety belt used to bind the human body near the fixed structure by ropes or belts around the fixed structure so that the operator's hands can perform other operations. 2. Fall arrest harne...
-
Balancing Anti Twist Board Twist preventer trac...
Product introduction Uses:for OPGW construction. The OPGW Head Board is used for pulling optical cables. Guide the optical cable into the pulley groove and prevent the optical cable from jumping out of the pulley groove. If the optical cable is twisted during traction, it will be damaged. OPGW Head Board can prevent optical cable from twisting during traction. OPGW Head Board TECHNICAL PARAMETERS Item number Structural Style Rated Load （KN） Hammer length ...
-
POWER TOWER Aluminum Extension Pole A-Shape Tub...
Product introduction A-Shape Tubular Gin Pole is used for transmission and distribution line engineering, sling tower material, positioning pulley set use. A-Shape Tubular Gin Pole is used for assembling power stringing tower. The main material adopts high strength aluminum alloy pipe, rivet joint makes, portable and durable. It is mainly made of high-strength aluminum alloy pipes of 2 specifications. The specifications are: outer diameter 150mm * thickness 6mm and o...
-
Gasoline Electric Power Conductor Cable Crimpin...
Product introduction The ultra high pressure hydraulic pump adopts gasoline power or electric power, and the output hydraulic pressure can reach 80MPa. Used together with crimping pliers and suitable crimping die, it is mainly used for conductor hydraulic crimping and cable hydraulic crimping. The output hydraulic pressure of the ultra-high pressure hydraulic pump rises rapidly, and the maximum output pressure can be reached instantly. At the same time, the output h...