Products

  • Cable Roller Nylon Aluminum Steel Sheave Ground Cable Pulling Pulley

    Cable Roller Nylon Aluminum Steel Sheave Ground Cable Pulling Pulley

    Cable rollers should always be used when pulling cables. Straight cable runs are pulled in using straight cable rollers suitably placed in the ground. Cable rollers can avoid damaging cable surface sheath by friction between cable and ground.

  • Triple Wheels Neoprene Lined Aluminum Sheaves Coated Rubber Stringing Block

    Triple Wheels Neoprene Lined Aluminum Sheaves Coated Rubber Stringing Block

    Aluminum Sheaves Coated Rubber Stringing Block, the aluminum sheave or the nylon sheave used as the base material, and the sheave groove is coated with rubber. Before coating, the groove surface of the aluminum sheave or the nylon sheave needs to be specially processed, Then the high temperature rubber pressing process is adopted, so that the rubber layer can be firmly adhered to the aluminum sheave or the nylon sheave.

  • 822mm Wheels Sheaves Conductor Pulley Stringing Block

    822mm Wheels Sheaves Conductor Pulley Stringing Block

    This 822mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ822 × Φ710 × 110 (mm). Under normal circumstances,  822mm Large Diameter Stringing Block maximum suitable conductor is ACSR630, which means that the ACSR conductor has the maximum cross section of 630 square millimeters. The maximum conductor diameter is 35mm.

  • POWER TOWER Aluminum Extension Pole A-Shape Tubular Gin Pole

    POWER TOWER Aluminum Extension Pole A-Shape Tubular Gin Pole

    A-Shape Tubular Gin Pole is used for transmission and distribution line engineering, sling tower material, positioning pulley set use. A-Shape Tubular Gin Pole is used for assembling power stringing tower.

  • Aluminum Rollers or Nylon Rollers Cable Pulling Pulley Block Frame Type Cable Pulley

    Aluminum Rollers or Nylon Rollers Cable Pulling Pulley Block Frame Type Cable Pulley

    Product introduction  Cable rollers should always be used when pulling cables. Straight cable runs are pulled in using frame type cable pulleys suitably placed in the ground, avoid damaging cable surface sheath by friction between cable and ground. Cable roller spacing is dependent on cable type being laid and the cable pulling tension along the route. Frame type cable pulleys are used to support the cable over the entire drum width immediately before being pulled into the trench. Frame type...