ALUMINUM ALLOY GRIPPER INSULATED CONDUCTOR Come Along Clamp

Short Description:


Product Detail

Product Tags

Product introduction
Aluminum Alloy Insulated Conductor Grippers(come along clamp) are a commonly used wire holding tool in the construction and maintenance of electric power, telecommunications and railway electrification overhead lines.
The grippers(come along clamp) is applicable to adjust sag and tension insulated conductor during stringing.
The grippers(come along clamp) is forged from high-strength aluminum alloy, with small volume and light weight.
All gripping jaws are produced with new technology to increase jaw life.
The grippers(come along clamp) are designed to be used over a wider range of insulated conductor diameters.
Aluminum Alloy Insulated Conductor Grippers(come along clamp) are usually used to clamp insulated conductor. It cannot be used to clamp ACSR and other conductors
INSULATED CONDUCTOR Come Along Clamp TECHNICAL PARAMETERS

Item number

Model

Rated LoadKN

Applicable ConductorACSR

Applicable

Diametermm

Max Open

mm

Weight

KG

13192

SKJL-1

10

25-70

Φ10-Φ14

15

1.4

13202

SKJL-1.5

15

95-120

Φ14-Φ20

22

3.0

13212

SKJL-2

20

150-240

Φ20-Φ25

27

4.0

13213

SKJL-2.5

25

300-400

Φ25-Φ32

34

4.0

13214

SKJLA-3

30

500-630

Φ32-Φ37

39

4.0


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Nylon Steel Sheave Cable Ground Roller Pulley Block Grounding Wire Stringing Pulley

      Nylon Steel Sheave Cable Ground Roller Pulley B...

      Product introduction  Grounding Wire Stringing Pulley is apply to pull steel strand. Features: Good wear-resistance, no deformation, long life cycle and so on. The frame is made of steel. The sheaves materials include nylon wheel and steel sheave. Nylon sheaves are represented by N letters.The rest are steel sheave. The aluminum wheel needs to be customized. Ground wire stringing pulleys of different specifications shall be selected according to different steel stran...

    • Independent Conductor Overturn Prevention Balanced Pulley Traction Guidance Head Boards

      Independent Conductor Overturn Prevention Balan...

      Product introduction  Traction Guidance Head Boards for Two Bundle Conductors are designed to avoid torsion strain accumulation during line stringing. Traction Guidance Head Boards is using with the Swivel Joint, traction guidance and anti overturning. Traction Guidance Head Boards is apply to tension stringing or mechanical traction stringing construc. The structure of the independent conductor type head boards for two bundle conductors is simple. The conductor bala...

    • COME ALONG CLAMP ALUMINUM ALLOY CONDUCTOR WIRE MULTI-SEGMENT GRIPPER

      COME ALONG CLAMP ALUMINUM ALLOY CONDUCTOR WIRE ...

      Product introduction  1. The body of multi-segment type gripper is forging of high strength aluminum alloy with light weight and no damage to conductor. 2. Use multi-segment type bolts clamp structure, so the traction load is large. Not to slip line and hurt the line. Need to specify when ordering diameter and conductor models. The groove for wire clamping shall be processed according to the wire diameter. Select the number of slice that make up the product according...

    • OUBLE DRUM Four Wheel Tractor TRACTOR WINCH

      OUBLE DRUM Four Wheel Tractor TRACTOR WINCH

      Product introduction The product is applicable to setting out, tightening, pole erection, take-up, laying cables and other construction work. Fast Speed Double Drum Winch Tractor For Pulling and Lifting During Tower Erection is applicable to pull wire rope and anti twist wire rope.Suitable for the construction of the tower line,traction line,tight line operation,laying cable. The gear consists of low gear and high gear. Both high and low gears have 4 forward gears an...

    • TRIANGULAR SECTION HORIZONTAL PLATFORM STRUCTURE HANGING LADDER

      TRIANGULAR SECTION HORIZONTAL PLATFORM STRUCTUR...

      Product introduction The hanging ladder can be used for corner tower hanging operations, etc. When hanging a ladder horizontally, one end of the ladder is hung on the cross arm angle iron, and the other end of the ladder is hung on the wire. Hanging ladders can also be used vertically. Item No [L] [A] [B] [B1] [C] [D] m mm mm mm mm mm 22251 1.5 220 900 100 320 320 22252 2.5 220 900 100 320 320 22253 3 220 900 100 320 320 22255 10 220 ...

    • Connect Pulling Wire Rope Connecting Rotary Connector Swivel Joint

      Connect Pulling Wire Rope Connecting Rotary Con...

      Product introduction: Swivel Joints are a commonly used tools for traction connection in the construction and maintenance of electric power, telecommunications and railway electrification overhead lines. It is suitable to traction of connecting anti-twisting wire rope and conductor. During the construction of transmission lines, traction of overhead conductor or underground cables, it is used to connect with the mesh sock, head board and anti-twisting wire rope, in o...