Connect Pulling Wire Rope Connecting Rotary Connector Swivel Joint
Product introduction:
Swivel Joints are a commonly used tools for traction connection in the construction and maintenance of electric power, telecommunications and railway electrification overhead lines. It is suitable to traction of connecting anti-twisting wire rope and conductor. During the construction of transmission lines, traction of overhead conductor or underground cables, it is used to connect with the mesh sock, head board and anti-twisting wire rope, in order to release anti-twisting wire rope twisting.
Feature:
1.The products are made of high-strength alloy steel. The product has high strength, with a safety factor of more than 3 times，light weight, small size and good looking.
2. It smoothly can pass through the corner pulley, stringing block, tension machine, traction machine and other equipments.
3.It is used to connect with the mesh sock, head board and anti twist steel wire rope. It during traction by rotating it, in order to release anti twist steel wire rope twisting. In this way, the conductor connected with the mesh sock will not rotate and the conductor will not be damaged.
There are many specifications of swivel Joints, and the loads range from 5kn to 250kN. Various specifications are available in stock.
Swivel Joint
|
Item number |
Model |
Rated Load (KN） |
Main Size (mm) |
Weight （Kg） |
||||
|
A |
B |
C |
D |
E |
||||
|
17121 |
SLX-0.5 |
5 |
19 |
61 |
40 |
8 |
9 |
0.20 |
|
17122 |
SLX-1 |
10 |
30 |
100 |
70 |
12 |
13 |
0.40 |
|
17123 |
SLX-2 |
20 |
35 |
120 |
90 |
14 |
14 |
0.55 |
|
17124 |
SLX-3 |
30 |
37 |
129 |
95 |
16 |
16 |
0.65 |
|
17125 |
SLX-5 |
50 |
42 |
154 |
116 |
18 |
17 |
1.50 |
|
17126 |
SLX-8 |
80 |
57 |
220 |
165 |
24 |
22 |
2.40 |
|
17127 |
SL130 |
130 |
62 |
248 |
192 |
26 |
24 |
3.50 |
|
17128 |
SL180 |
180 |
75 |
294 |
222 |
26 |
26 |
7.20 |
|
17129 |
SL250 |
250 |
85 |
331 |
251 |
30 |
30 |
10.5 |
|
17130 |
SL250V |
250 |
80 |
323 |
243 |
30 |
30 |
8.0 |
Related products
-
Observe conductor Sagging measuring scope Radia...
Product introduction Zoom Sag Scope is suitable for accurate conductor sag measurements by means of the parallelogram method and different length method. Equipped with a special anchoring support for steel tower. Fix the Zoom Sag Scope on the electric tower. Adjust the level，Keep the Zoom Sag Scope horizontal. Adjust the lens to observe object in different distance. First loosen the tight ring, than adjust till the cross in lens is clear to be seen, and tighten the...
-
ACSR SPLICING SLEEVE PROTECTOR SPLICE PROTECTIO...
Product introduction Splicing protection sleeve is apply to protecting conductor pressure crimping tube on ACSR paying off and make it avoid torsion when pass through pulleys. Splicing protection sleeve is composed of two half steel pipes and four rubber heads. It is used to protect the crimping pipe and prevent the crimping tube from directly contacting the pulley and bending during paying off. The splicing protection sleeve must be selected according to the conduc...
-
ALUMINUM ALLOY GRIPPER INSULATED CONDUCTOR Come...
Product introduction Aluminum Alloy Insulated Conductor Grippers（come along clamp） are a commonly used wire holding tool in the construction and maintenance of electric power, telecommunications and railway electrification overhead lines. The grippers（come along clamp） is applicable to adjust sag and tension insulated conductor during stringing. The grippers（come along clamp） is forged from high-strength aluminum alloy, with small volume and light weight. All g...
-
UNIVERSAL STEEL PILE TO ANCHOR TEMPORARILY IN L...
Product introduction General steel piles are divided into steel pipe piles, angle steel piles, and round steel piles. The characteristics of steel piles are: (1) light weight, good rigidity, convenient loading, unloading, transportation, and stacking, and not easily damaged; (2) High bearing capacity. Due to the high strength of steel, it can effectively penetrate into hard soil layers, making the pile body less prone to damage and achieving great single pile bearing...
-
Optical Cable Construction Come Along Clamps OP...
Product introduction OPGW Grippers are for holding the OPGW overhead optical ground wire, cable diameter is the same as grip size, in order to ensure clamping firmly, reduce the pressure of clamped parts cable is clamped part and protect the inside fiber of cable not to be damaged. The OPGW Gripper has two structures, one is the bolts clamp structure, and the other is the automatic clamp structure. The body is forging of high strength aluminum alloy and it can prote...
-
Insulation Fiberglass Single A-Shap Telescopic ...
Product introduction Insulating ladders are mostly used as special climbing tools for live working in electric power engineering, telecommunication engineering, electrical engineering, hydropower engineering, etc. The good insulation characteristics of the insulating ladder ensure the life safety of workers to the greatest extent. The insulated ladder is divided into insulated single ladder, insulated herringbone ladder, insulated telescopic, insulated telescopic he...