Pulley
-
Hooked Conductor Stringing Block Sitting Hanging Dual-Use Stringing Pulley
Hanging Dual-Use Stringing Pulleys have are used to support conductors,OPGW,ADSS, communicatio lines. The sheave of the pulley are made from higth strength nylon,or aluminum materials ,and the frame of are made of galvanized steel. Product can be used in hanging type stringing pulley or skyward stringing pulley.
-
Aluminum Nylon Sheave Conductor Aerial Cable Roller Stringing Pulley
Aerial Cable Roller Stringing Pulley is used to aerial electric power, communication cable and power cable construction. The sheaves of Aerial Cable Stringing Roller are made of aluminum alloy or high strength MC nylon.
-
Stringing Construction Bundled Conductor Aerial Helicopter Stringing Pulley
The helicopter hangs the guide rope through the helicopter pulley. The Aerial Helicopter Stringing Pulley of different specifications and sizes shall be selected according to different lines. The Aerial Helicopter Stringing Pulley can be divided into single sheave, three sheaves, five sheaves.
-
Conductor Pulley Block Stringing Pulley Grounding Roller Stringing Block
The Stringing Pulley With Grounding Roller is used to release the induced current on the line during the setting out construction. The conductor is located between the grounding pulley and the main pulley. The conductor is in contact with the grounding pulley, and the induced current on the conductor is released through the grounding wire connected with the Stringing Pulley With Grounding Roller. Avoid accidental electric shock of construction personnel.
-
Casting Steel Wheel Sheave Hook Type Lifting Block Hoisting Tackle
Casting steel wheel hoisting tackle is suitable for assemble and erect the tower, line construction, hoist devices and other hoist operation.
The hoisting tackle group formed by the combination of hoisting tackle, hoisting tackle can change the direction of the traction wire rope of the hoisting tackle and the hoisting tackle group and lift or move moving objects for many times. -
Customized Durable PA6 Nylon Sheave Neoprene Lined MC Nylon Wheel
Nylon Wheel is made of MC nylon, which is mainly made of caprolactam material by heating, melting, casting and thermoplastic molding. Nylon Wheel has high strength, light weight, wear resistance and corrosion resistance. The traction load of the Nylon Wheel is large. When the Nylon Wheel groove is pulled through the conductor, there is basically no damage to the conductor.
-
Pit Entrance Exit Corner Pithead Cable Roller Pithead Cable Pulley
The pithead cable pulley（Pithead Cable Roller） should always be used when pulling cables. The pithead cable pulley（Pithead Cable Roller） is required at the pithead. Use the pithead cable pulley properly placed on the pithead, avoid damaging cable surface sheath by friction between cable and pithead.
-
660mm Wheels Sheaves Bundled Wire Conductor Pulley Stringing Block
This 660*100mm Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ660 × Φ560 × 100 (mm). This 660mm Stringing Block can be divided into single sheave, three sheaves, five sheaves and seven sheaves according to the number of sheaves.
-
Aluminum Alloy Plated Nylon Sheave Hoist Pulley Block Hoisting Tackle
Nylon wheel hoisting tackle is suitable for assemble and erect the tower, line construction, hoist devices and other hoist operation. Nylon wheel hoisting tackle is made of aluminum alloy side plate with MC nylon wheel, it has light weight. Easy to carry and hang. The wheel has good wear resistance and will not damage the steel wire rope and rope.
-
Cable Roller Nylon Aluminum Steel Sheave Ground Cable Pulling Pulley
Cable rollers should always be used when pulling cables. Straight cable runs are pulled in using straight cable rollers suitably placed in the ground. Cable rollers can avoid damaging cable surface sheath by friction between cable and ground.
-
Triple Wheels Neoprene Lined Aluminum Sheaves Coated Rubber Stringing Block
Aluminum Sheaves Coated Rubber Stringing Block, the aluminum sheave or the nylon sheave used as the base material, and the sheave groove is coated with rubber. Before coating, the groove surface of the aluminum sheave or the nylon sheave needs to be specially processed, Then the high temperature rubber pressing process is adopted, so that the rubber layer can be firmly adhered to the aluminum sheave or the nylon sheave.
-
822mm Wheels Sheaves Conductor Pulley Stringing Block
This 822mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ822 × Φ710 × 110 (mm). Under normal circumstances, 822mm Large Diameter Stringing Block maximum suitable conductor is ACSR630, which means that the ACSR conductor has the maximum cross section of 630 square millimeters. The maximum conductor diameter is 35mm.