Conductor Pulley Block Stringing Pulley Grounding Roller Stringing Block
Product introduction
The Stringing Pulley With Grounding Roller is used to release the induced current on the line during the setting out construction. The conductor is located between the grounding pulley and the main pulley. The conductor is in contact with the grounding pulley, and the induced current on the conductor is released through the grounding wire connected with the grounding pulley. Avoid accidental electric shock of construction personnel.
The Stringing Pulley With Grounding Roller of different specifications and sizes shall be selected according to different lines. The Stringing Pulley With Grounding Roller can be divided into single sheave, three sheaves, five sheaves. Material of main pulley can be divided into MC nylon material, aluminum alloy material, nylon sheave coated rubber and aluminum sheave coated rubber. The intermediate sheave can also be steel sheave. The grounding wheel is made of aluminum alloy.
Stringing Pulley With Grounding Roller TECHNICAL PARAMETERS
|
Item number |
Model |
Outside Diameter Of Sheave(mm) |
Sheaves |
|
10301 |
SHDN508D |
Φ508×75 (508*100) |
1 |
|
10302 |
SHSN508D |
3 |
|
|
10303 |
SHWN508D |
5 |
|
|
10311 |
SHDN660D |
Φ660×100 (660×110) |
1 |
|
10312 |
SHSN660D |
3 |
|
|
10313 |
SHWN660D |
5 |
|
|
10316-1 |
SHDN822D |
Φ822×110 |
1 |
|
10316-3 |
SHSN822D |
3 |
|
|
10316-5 |
SHWN660D |
5 |
|
|
10316 |
SHDN916D |
Φ916X110 |
1 |
|
10317 |
SHSN916D |
3 |
|
|
10318 |
SHWN916D |
5 |
Related products
-
ALUMINUM SINGLE HANGING UNIVERSAL STRINGING PULLEY
Product introduction It is a versatile stringing pulley. It either used in the head of insulator string, or fixed on the cross arm fixture. The side of the pulley can be opened so that the cable can be put into the pulley groove. UNIVERSAL STRINGING PULLEY TECHNICAL PARAMETERS Item number Rated load (kN) Sheave diameter(mm) Weight (kg) Applicable crossarm width of caliper (mm) Height (mm) Caliper weight(kg) 10295 10 Φ178×76 4.3 9...
-
Fiberglass High Voltage Brake Pull Rod Insulate...
Product introduction Insulated pull rod is suitable for high voltage switch out operating. They are produced from epoxy resin, super light,high voltage, high strength. The length and sections can be made depending on your request. There are two structural forms of insulating pull rod, one is the flat mouth spiral interface structure, and the multi section insulating rod is fixed and combined through threaded connection, with high strength. The other is a telescopic ...
-
ACSR SPLICING SLEEVE PROTECTOR SPLICE PROTECTIO...
Product introduction Splicing protection sleeve is apply to protecting conductor pressure crimping tube on ACSR paying off and make it avoid torsion when pass through pulleys. Splicing protection sleeve is composed of two half steel pipes and four rubber heads. It is used to protect the crimping pipe and prevent the crimping tube from directly contacting the pulley and bending during paying off. The splicing protection sleeve must be selected according to the conduc...
-
Optical Cable Construction Come Along Clamps OP...
Product introduction OPGW Grippers are for holding the OPGW overhead optical ground wire, cable diameter is the same as grip size, in order to ensure clamping firmly, reduce the pressure of clamped parts cable is clamped part and protect the inside fiber of cable not to be damaged. The OPGW Gripper has two structures, one is the bolts clamp structure, and the other is the automatic clamp structure. The body is forging of high strength aluminum alloy and it can prote...
-
Brake Frame Wire Rope Reel Stand
Product introduction It has good stability. Simple structure, convenient for handling. The site has good adaptability and is convenient for field construction. Equipped with brake, it is convenient to brake at any time when the anti twist wire rope drum rotates. Anti twist wire rope reel stand is applicable to be as the support of Anti twist wire rope reel in laying Anti twist wire rope.Used for recovering and releasing Anti twist wire rope. STEEL WIRE ROPE REEL STAN...
-
ACSR steel strand Ratchet Cutting Tools Manual ...
Product introduction The conductor cutter is used to cut off various conductor and steel strand. 1.Cutting the ACSR or steel strand. Type selection shall be based on outer diameter. See the cutting range in the parameter table for details. 2.Because of its light weight, it is easy to carry. It can even be operated with only one hand. 3.The conductor cutter has convenient operation, is labor saving and safe and can not damage conductor and human bodies. 4.Ratchet fee...