Lifting Pole Frame Aluminum Alloy Holding Internal Suspended Gin Pole
Product introduction
During used for transmission and distribution line engineering, The Internal Suspended Aluminum Alloy Holding Pole is used for internal suspension lifting of iron tower.
Adopt single-arm style, free from direction restriction, use convenience.
The main material adopts right angle aluminum alloy section, rivet joint makes, portable and durable.
According to the height of the lifting power tower and the lifting load weight, the internal suspended aluminum alloy holding pole with appropriate section and length shall be selected. Determine the specifications and dimensions of main and auxiliary materials, and segment the total length (generally 3-4m is a section).
Internal Suspended Aluminum Alloy Holding Pole TECHNICAL
|
Item number |
Model |
Length Range (m) |
Section（mm） |
Main Materials （mm） |
Auxiliary Materials （mm） |
Vertical Load （KN） |
Safety Factor (K) |
Weight （kg/m） |
|
03131 |
LBNX-300A |
8-16 |
300*300 |
50*50*4 |
25*25*3 |
38-13 |
2.5 |
10.5 |
|
03141 |
LBNX-300B |
11-18 |
300*300 |
50*50*5 |
30*30*3 |
40-15 |
2.5 |
11.0 |
|
03151 |
LBNX-400 |
12-20 |
400*400 |
50*50*5 |
30*30*3 |
43-13 |
2.5 |
14.6 |
|
03511 |
LBNX-500A |
12-20 |
500*500 |
60*60*5 |
30*30*3 |
75-34 |
2.5 |
18 |
|
03515 |
LBNX-500B |
14-22 |
500*500 |
60*60*5 |
40*40*3 |
2.5 |
20 |
|
|
03521 |
LBNX-500C |
15-23 |
500*500 |
70*70*6 |
40*40*3 |
88-42 |
2.5 |
21 |
|
03525 |
LBNX-500D |
17-25 |
500*500 |
70*70*6 |
50*50*4 |
2.5 |
22 |
|
|
03531 |
LBNX-600A |
15-23 |
600*600 |
60*60*6 |
40*40*3 |
75-38 |
2.5 |
20 |
|
03535 |
LBNX-600B |
17-25 |
600*600 |
70*70*6 |
40*40*3 |
2.5 |
21 |
|
|
03541 |
LBNX-600C |
17-25 |
600*600 |
70*70*6 |
50*50*4 |
119-58 |
2.5 |
22 |
|
03545 |
LBNX-600D |
17-25 |
600*600 |
75*75*6 |
50*50*4 |
2.5 |
24 |
|
|
03601 |
BNX-300 |
10-15 |
300*300 |
50*50*5 |
30*30*3 |
35-17 |
2.5 |
33 |
|
03602 |
BNX-400 |
12-16 |
400*400 |
50*50*5 |
30*30*3 |
51-29 |
2.5 |
43 |
|
03603 |
BNX-500 |
16-24 |
500*500 |
63*63*6 |
30*30*3 |
93-41 |
2.5 |
54 |
|
03604 |
BNX-600 |
16-32 |
600*600 |
70*70*6 |
40*40*4 |
221-72 |
2.5 |
63 |
|
03605 |
BNX-700 |
20-32 |
700*700 |
80*80*6 |
40*40*4 |
294-115 |
2.5 |
75 |
Related products
-
DIESEL GASOLINE ENGINE TRACTION CABLE Tapered D...
Product introduction Tapered Drum Recovery Take-up Pulling Winch is used to withdraw the old conductors or erect the overhead earth wires. Tapered Drum Recovery Take-up Pulling Winch is powered by gasoline or diesel. The Tapered Drum Recovery Take-up Pulling Winch adopts tapered drum. The Tapered Drum Recovery Take-up Pulling Winch is convenient for cable recycling. RECOVERY TAKE-UP PULLING WINCH TECHNICAL PARAMETERS Item number Model Rated Load (KN) Pullin...
-
Fiberglass High Voltage Brake Pull Rod Insulate...
Product introduction Insulated pull rod is suitable for high voltage switch out operating. They are produced from epoxy resin, super light,high voltage, high strength. The length and sections can be made depending on your request. There are two structural forms of insulating pull rod, one is the flat mouth spiral interface structure, and the multi section insulating rod is fixed and combined through threaded connection, with high strength. The other is a telescopic ...
-
Diesel Engine Gasoline Powered Winch Cable Doub...
Double drum winch is used in power transmission and distribution engineering, telephone construction tower erection, traction cable, line, hoisting tools , tower erection , pole setting,stringing wire in electrical power line construction, the winch is driven by a belt,effectively prevent the damage of overload. The double drum structure can reduce the damage of the wire rope during traction.The power of the winch can be diesel power or gasoline power as required.The...
-
WIRE ROPE PULLEY CONDUCTOR HIGH SPEED TURNING S...
Product introduction High speed steering block is apply to steel wire rope traction and turning During tension paying off. Its pulley groove can pass through steel wire rope Anti-twist Fixed Joint. The pulley of high-speed steering block is made of steel, which is divided into hanging plate open type and 8-ring closed type. High strength, heavy load, wear resistance. The maximum allowable speed of hauling rope is 80m/min. 12141B is front and rear double wheel type, ...
-
Wire Rope Pulling Cable traction net sleeve Cab...
Product introduction As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip. The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire. Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diameter, traction load and use environment. When paying off ...
-
EXTERNAL ALUMINUM STRANDS OF CONDUCTOR KNIFE Al...
Product introduction Manual aluminum strand stripper, outer layer of aluminum stripper for 240-900mm2 is applied to strip the outer layer of aluminum before crimping ACSR.The surface of cutting is flat. And the aluminum strand stripper don't hurt the steel core. The aluminum strands are separated by rotary cutting. During rotary cutting, keep the uncut aluminum strand clamped to prevent the aluminum strand from loosening and deformation. aluminum strand str...