FASTEN TOWER ANCHOR BOLTS Double sided sleeve wrench
Product introduction
Double sided sleeve wrench for fasten the tower anchor bolts is used to tighten the foundation bolts of tower. The Double sided sleeve wrench is used for fastening large nuts. The nut is not easy to loosen due to large torque when it is fastened with a torque rod.
Double sided sleeve wrench is light in weight, better hardness, toughness, durability.
SOCKET RATCHET WRENCH TECHNICAL PARAMETERS
|
Item number |
Model |
Weight （KG） |
|
05135 |
24(M16),27(M18) |
0.4 |
|
05136 |
27(M18),30(M20) |
0.4 |
|
05137 |
30(M20),32(M22) |
0.5 |
|
05138 |
32(M22),36(M24) |
0.6 |
|
05139 |
36(M24),41(M27) |
0.8 |
|
05140 |
41(M27),46(M30) |
0.9 |
|
05141 |
46(M30),55(M36) |
1.2 |
|
05142 |
55(M36),65(M42) |
1.8 |
|
05143 |
65(M42),75(M48) |
2.4 |
|
05144 |
75(M48),80(M52) |
3.0 |
|
05145 |
80(M52),85(M56) |
3.8 |
|
05146 |
85(M56),90(M60) |
4.5 |
|
05147 |
90(M60),95(M64) |
5.0 |
|
05148 |
100(M68),105(M72) |
6.0 |
Related products
-
Measuring High Voltage Audible Visual Alarm Hig...
Product introduction The high voltage electroscope is made of electronic integrated circuit and has stable and reliable performance. It has the features of full circuit self checking function and strong anti-interference. High voltage electroscope is applicable to the power inspection of 0.4, 10KV, 35KV, 110KV, 220KV, 330KV, 500KV AC power transmission and distribution lines and equipment. It can correctly and reliably inspect power no matter during the day or at ni...
-
Copper Aluminum Armoured Cable Ratchet Cutting ...
Product introduction The cable cutter is used to cut off various power cables and communication cables. 1.Cutting the Copper aluminum cable or copper aluminum armoured cable. Type selection shall be based on cable structure and outer diameter. See the cutting range in the parameter table for details. 2.Because of its light weight, it is easy to carry. It can even be operated with only one hand. 3.The cable cutter has convenient operation, is labor saving and safe an...
-
Observe conductor Sagging measuring scope Radia...
Product introduction Zoom Sag Scope is suitable for accurate conductor sag measurements by means of the parallelogram method and different length method. Equipped with a special anchoring support for steel tower. Fix the Zoom Sag Scope on the electric tower. Adjust the level，Keep the Zoom Sag Scope horizontal. Adjust the lens to observe object in different distance. First loosen the tight ring, than adjust till the cross in lens is clear to be seen, and tighten the...
-
Single Double Four Conductor Frame Cart Bicycle...
Product introduction Overhead line Conductor Inspection Trolley is used to install accessories and overhaul on Conductor,ect. According to the number of applicable conductors, it is divided into Single Conductor Inspection Trolley, Double Conductor Inspection Trolley and Four Conductor Inspection Trolley. According to the structural form, it is divided into Simple Conductor Inspection Trolley, Bicycle Conductor Inspection Trolley and Frame Conductor Inspection Trolle...
-
Wire Rope ACSR Steel Strand Ratchet Cutting Too...
Product introduction The Manual Telescopic conduct Cutter is used to cut off various Wire rope or ACSR and steel strand. 1.The model of cutting machine shall be determined according to the cable material and cable outer diameter. See the cutting range in the parameter table for details. 2.Because of its light weight, it is easy to carry. It can even be operated with only one hand. 3.The cutter has convenient operation, is labor saving and safe and can not damage con...
-
INSULATION Semiconductor Layer Insulating layer...
Product introduction Adjustable insulation cable layer stripper, insulated wire stripper is used to strip the layer insulation of the insulated cable. Knife-edge can be fine-tuned to overcome the thickness of the nonuniform outer layer of insulation, and not to hurt copper and aluminum line.It is made by high strength aluminum alloy. The stripping range is 30mm, 40mm, 65mm, 105mm and 160mm in diameter. Model selection shall be based on the outer diameter of the cabl...