MULTIFUNCTIONAL COPPER GENERATRIX HYDRAULIC BUS BAR MACHINING MACHINE
Product introduction
Multi-function Bus-bar Processing: Cutting, Punching, Bending(horizontal and vertical), Crimping and Embossing, etc.
Select the type according to the Bus-bar specification and bus processing requirements.
It has the following functions: With three functions, cutting, punching and bending.
With four functions, cutting, punching, bending and crimping. With four functions,cutting, punching and bending(horizontal and vertical). Other functions, such as embossing.
HYDRAULIC BUS BAR MACHINING MACHINE TECHNICAL PARAMETERS
|
Item number |
06232 |
06231A |
06231 |
|
Model |
EPCB-301/301A |
EPCB-401A/401B |
EPCB-401 |
|
Function |
with three functions,cutting, punching and bending |
with four functions, cutting, punching, bending and crimping |
with four functions,cutting, punching and bending(horizontal and vertical) |
|
Dimension of work table |
690x690x730mm |
.690x690x730mm |
690x690x730mm |
|
Voltage single phase |
220V50HZ |
220V50HZ |
220V50HZ |
|
Rating oil pressure |
700kg/cm² |
700kg/cm² |
700kg/cm ² |
|
Bending force |
170KN/200KN |
170KN/200KN |
270KN |
|
Bending range |
150x10mm max/ 200x12mm max |
150x10mm max/ 200x12mm max |
125x12.5mm max |
|
Cutting force |
200KN/300KN |
200KN/300KN |
200KN/300KN |
|
Cutting rang |
150x10mm max/ 200x12mm max |
150x10mm max/ 200x12mm max |
150x10mm max/ 200x12mm max |
|
Punching force |
300KN/350KN |
300KN/350KN |
300KN/350KN |
|
Distance from hole to sheet side |
95x110mm max |
95x110mm max |
95x110mm |
|
Punch rang |
3/8"(Φ10.5mm),1/2"(Φ13.8mm),5/8"(Φ17mm),3/4"(Φ20.5mm) |
||
|
Package |
wooden case |
wooden case |
wooden case |
Related products
-
Portable Electric Lithium Battery Powered Recha...
Product introduction Rechargeable Hydraulic Cable Cutter is used for cutting armored cables and copper aluminum cables. Rechargeable Hydraulic Cable Cutter is light weight portable body design, portable, easy to operate. The tong head rotates 360 ° and can be flexibly used in various sites. The rapid hydraulic system is designed to push the piston, automatically form sufficient working pressure, and ensure the shearing speed and strength. When shearing is completed,...
-
LITHIUM BATTERY ELECTRICAL POWERED CHARGING HYD...
Product introduction CHARGING HYDRAULIC CRIMPING PLIES is suit for crimping big size of lugs. CHARGING HYDRAULIC CRIMPING PLIES is suitable for outside and inside project of the power distribution station. CHARGING HYDRAULIC CRIMPING PLIES is the special tools for all kinds if connecting and building over head cable. Light weight portable body design, portable, easy to operate. Interchangeable die ensures accurate crimping of terminals and connecting tubes of differ...
-
Gasoline Electric Power Conductor Cable Crimpin...
Product introduction The ultra high pressure hydraulic pump adopts gasoline power or electric power, and the output hydraulic pressure can reach 80MPa. Used together with crimping pliers and suitable crimping die, it is mainly used for conductor hydraulic crimping and cable hydraulic crimping. The output hydraulic pressure of the ultra-high pressure hydraulic pump rises rapidly, and the maximum output pressure can be reached instantly. At the same time, the output h...
-
PORTABLE MODEL HYDRAULIC ANGLE STEEL CUTTER
Product introduction Hydraulic Angle Steel Cutter is used to cut off the angle steel and the hydraulic pump needs to be matched. Fast cutting, labor saving, no noise, no scrap iron, smooth and flat cutting section. Manual hydraulic pump or charging hydraulic pump can be configured in the places without electric field, and electric hydraulic pump can be equipped in the places with electric field. HYDRAULIC ANGLE STEEL CUTTER TECHNICAL PARAMETERS ...
-
PORTABLE Flat Vertical Bending MANUAL BENDER HY...
Product introduction Portable hydraulic bus bar bender is durable due to fixed structure, and bending plane is adopted for support. Equipped with scale plate, the portable hydraulic bus bar bender can look for the bending angle. And bending range is from 0 to 90 °. Working with a manual hydraulic pump or an electric hydraulic pump. Different types of hydraulic bus-bar benders are selected according to the width and thickness of the bus and whether the plane bending...
-
HYDRAULIC HOLE PUNCH Cu/Al Busbar Iron Plate Hy...
Product introduction Model CH-60 CH70 CH80 CH100 Hydraulic Punching Tools works with an external hydraulic pump (Hand or Foot or Electric pump). It is designed to punch round holes on Cu/Al Busbar or Iron plate, angle iron, channel steel, etc. With hydraulic power, sharp punching dies can easy fast and clean punching can be achieved. Operation speed of Hydraulic Hole Puncher is fast than electric drill. It only need a few seconds for punching and there is no burr a...