Hydraulic Traction Conductor Stringing Equipment Hydraulic Traction Equipment

Short Description:

The Hydraulic Traction is used for the traction of various conductors, ground wires, OPGW and ADSS during tension setting out. Hydraulic Traction with various traction loads ranging from 3 tons to 42 tons have a complete range.


Product Detail

Product Tags

Product introduction
The Hydraulic Traction is used for the traction of various conductors, ground wires, OPGW and ADSS during tension setting out.
Infinitely variable speed and pull force control ,the pull in the rope can be read on the line pull gauge .
The max pull for conductor–stringing operation can preset ,automatic overload protection system .
Spring applied –hydraulic release brake acts automatically in case of hydraulic failure ensure to safety .
With hydraulic pulling rope clamp,replacing steel rope conveniently.
With wire rope automatic winding device,automatic rope laying,loading and unloading convenience.
Hydraulic Traction with various traction loads ranging from 3 tons to 42 tons have a complete range.
Engine : Cummins water cooled diesel engine.
Main variable pump and main motor :Rexroth (BOSCH)
Reducer :Rexroth (BOSCH)
Main hydraulic valve : Rexroth (BOSCH)
Matched reel:GSP1100-1400

1e01b263b373ca2ffcf3b154dd361c7

TRAN (2)

TRAN (4)

mmexport1660549513032
4054eaae0e6cd6d8d63208a298e9398

TRAN (3)

103ae4a7077b89377f3bae0772d6d1b

Hydraulic Traction Technical Parameters

Item number 07001 07011 07031 07041 07051 07061 07065 07071 07075
Model QY-30Y QY-40Y QY-60Y QY-90Y QY-180Y QY-220Y QY-250Y QY-300Y QY-420Y
Maximum
pull forc
(KN)
30 40 60 90 180 220 250 300 420
Continuous
pull forc
(KN)
25 35 50 80 150 180 200 250 350
Maximum pull force (KM/H) 5 5 5 5 5 5 5 5 5
Bottom of
groovr diamere
(MM)
Φ300 Φ400 Φ460 Φ520 Φ630 Φ760 Φ820 Φ960 Φ960
Number
of groovr
(MM)
7 7 7 7 9 10 10 10 11
Maximum
suitable stell
rope diamete
(MM)
Φ13 Φ16 Φ18 Φ20 Φ24 Φ30 Φ32 Φ38 Φ45
Maximum
through
connectors
diamete
(MM)
Φ40 Φ50 Φ60 Φ60 Φ63 Φ75 Φ80 Φ80 Φ80
Engine power/speed
(KW/RPM)
31/
2200
60/
2000
77/
2800
123/
2500
209/
2100
243/
2100
261/
2100
298/
2100
402/
2100
Dimensions
(M)
3.2
x1.6x2
3.5
x2x2
3.8
x2.1x2.3
3.5
x2.1x2.5
5.5
x2.2x2.6
5.7
x2.3x2.6
5.8
x2.4x2.6
5.9
x2.5x2.9
6.1
x2.6x2.8
Weight
(KG)
1500 `2500 3000 4300 7500 8000 9000 11500 14800
matching wire rope tray Mode GSP
950
GSP
1400
GSP
1400
GSP
1400
GSP
1600
GSP
1600
GSP
1600
GSP
1900
GSP
1900
Item No. 07125A 07125C 07125C 07125C 07125D 07125D 07125D 07125E 07125E

Transmission Line Hydraulic Traction Stringing Equipment For Overhead Trans Mission Line Construction (1)

Transmission Line Hydraulic Traction Stringing Equipment For Overhead Trans Mission Line Construction (6)

Transmission Line Hydraulic Traction Stringing Equipment For Overhead Trans Mission Line Construction (2)

Transmission Line Hydraulic Traction Stringing Equipment For Overhead Trans Mission Line Construction (3)

Transmission Line Hydraulic Traction Stringing Equipment For Overhead Trans Mission Line Construction (5)

Transmission Line Hydraulic Traction Stringing Equipment For Overhead Trans Mission Line Construction (4)


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • HYDRAULIC TENSIONING STRINGING EQUIPMENT OVERHEAD LINE

      HYDRAULIC TENSIONING STRINGING EQUIPMENT OVERHE...

      Product introduction  The Hydraulic tensioning equipment is used for the tensioning of various conductors, ground wires, OPGW and ADSS during tension setting out. Bull wheel with wear proof MC nylon lining segments. Infinitely variable tension control and constant tension conductor stringing. Spring applied hydraulic released brake acts automatically in case of hydraulic failure to ensu safety Attached two sets of hydraulic power output interface to connect hydraulic...

    • DUAL-SHEAVE ALUMINUM STEEL BOTH SIDE OPENING HOISTING TACKLE

      DUAL-SHEAVE ALUMINUM STEEL BOTH SIDE OPENING HO...

      Product introduction  Both side opening hoisting tackle is suitable for assemble and erect the tower,line construction,hoist devices and other hoist operation. The hoisting tackle group formed by the combination of hoisting tackle can change the direction of the traction wire rope of the hoisting tackle and the hoisting tackle group and lift or move objects for many times. Product is made of both side opening steel side plate with steel wheel. The wheel has good wear...

    • Drum Brake Hydraulic Brake Spiral Rise Hydraulic Lifting Conductor Reel Stand

      Drum Brake Hydraulic Brake Spiral Rise Hydrauli...

      Product introduction During the construction of the line, it is applicable to be as the support of conductor and large cable reel in laying cables. They have equipped with a braking device. There are two kinds of braking devices: manual mechanical brake disc and hydraulic motor brake. The lifting device is divided into two types: manual screw lifting and manual hydraulic lifting. The paying off frame with hydraulic motor brake can be connected with the hydraulic outp...

    • Fiberglass High Voltage Brake Pull Rod Insulated Pull Rod

      Fiberglass High Voltage Brake Pull Rod Insulate...

      Product introduction  Insulated pull rod is suitable for high voltage switch out operating. They are produced from epoxy resin, super light,high voltage, high strength. The length and sections can be made depending on your request. There are two structural forms of insulating pull rod, one is the flat mouth spiral interface structure, and the multi section insulating rod is fixed and combined through threaded connection, with high strength. The other is a telescopic ...

    • EXTERNAL ALUMINUM STRANDS OF CONDUCTOR KNIFE Aluminum Strand Stripper

      EXTERNAL ALUMINUM STRANDS OF CONDUCTOR KNIFE Al...

      Product introduction  Manual aluminum strand stripper, outer layer of aluminum stripper for 240-900mm2 is applied to strip the outer layer of aluminum before crimping ACSR.The surface of cutting is flat. And the aluminum strand stripper don't hurt the steel core. The aluminum strands are separated by rotary cutting. During rotary cutting, keep the uncut aluminum strand clamped to prevent the aluminum strand from loosening and deformation. aluminum strand str...

    • TRACTION LIFTING FLOOR ANCHORING TEMPORARILY GROUND ANCHOR

      TRACTION LIFTING FLOOR ANCHORING TEMPORARILY GR...

      Product introduction The ground anchor is applied to fixing and fastening the winches, conductor pullers, conductor tensioners, conductor tractions and temporary pulling ropes in line construction. The anchor is of welded structure of steel plate with corrosion-resistant primer on its surface, and it is durable in its quality. Bury the anchor under the ground in appropriate depth and make it well tamped, lead the steel rope which fixed on it to its direction upon the...