TRACTION LIFTING FLOOR ANCHORING TEMPORARILY GROUND ANCHOR

Short Description:


Product Detail

Product Tags

Product introduction

The ground anchor is applied to fixing and fastening the winches, conductor pullers, conductor tensioners, conductor tractions and temporary pulling ropes in line construction.
The anchor is of welded structure of steel plate with corrosion-resistant primer on its surface, and it is durable in its quality. Bury the anchor under the ground in appropriate depth and make it well tamped, lead the steel rope which fixed on it to its direction upon the ground.
Excavate ground anchors pit according to the required depth. Put the anchor in the ground anchors pit.Anchor the anchor rope and the ground anchor,and oblique to the elicitation. When the fill is tamped,it can be used.

High strength braided nylon rope TECHNICAL PARAMETERS

Item number

Model

Allowable

pull(KN)

Valid depth(m)

Main size(mm)

Weight(kg)

A

B

C

d

02120

SDM3

30

1.8

800

250

150

Φ25

22.5

02121

SDM5

50

1.8

900

270

180

Φ28

30

02122

SDM10

100

2.0

1200

290

220

Φ36

55

02123

SDM16

160

2.5

1500

500

258

/

105

TRACTION LIFTING FLOOR ANCHORING TEMPORARILY GROUND ANCHOR (4)

TRACTION LIFTING FLOOR ANCHORING TEMPORARILY GROUND ANCHOR (3)
TRACTION LIFTING FLOOR ANCHORING TEMPORARILY GROUND ANCHOR (1)
TRACTION LIFTING FLOOR ANCHORING TEMPORARILY GROUND ANCHOR (7)
TRACTION LIFTING FLOOR ANCHORING TEMPORARILY GROUND ANCHOR (2)
TRACTION LIFTING FLOOR ANCHORING TEMPORARILY GROUND ANCHOR (7)

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Traction Anti Twist Wire Rope Cable Joints Connector Anti-twist Fixed Joint

      Traction Anti Twist Wire Rope Cable Joints Conn...

      Product introduction  Anti-twist Fixed Joint is applicable to the connection of wire rope, anti twist wire rope, Dinima rope, DuPont wire rope and other traction ropes. The minimum traction load is 10KN, and the maximum traction load is 25KN. The anti-twist fixed joint is made of 40 chrome alloy steel. 1. High strength, small size, light weight, and good looking. 2. It smoothly can pass through the corners, pulley, tension machine, traction machine and other equipmen...

    • 1160mm Wheels Sheaves Bundled Wire Conductor Pulley Stringing Block

      1160mm Wheels Sheaves Bundled Wire Conductor Pu...

      Product introduction  This 1160mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ1160 × Φ1000 × 150 (mm). Under normal circumstances,its maximum suitable conductor is ACSR1250, which means that the aluminum of our conducting wire has the maximum cross section of 1250 square millimeters. The maximum diameter through which the sheave passes is125mm. Under normal circumstances, the model of the maxi...

    • TRACTION LIFTING REVOLVE ANCHORING TEMPORARILY GROUND AUGER ROTARY ANCHOR

      TRACTION LIFTING REVOLVE ANCHORING TEMPORARILY ...

      Product introduction The rotary anchor is applied to fixing and fastening the winches, conductor pullers, conductor tensioners, conductor tractions,blocks and temporary pulling ropes in line construction. The rotary anchor is of welded structure of welding of round steel and spiral blade with corrosion-resistant primer on its surface, and it is durable in its quality. Bury the rotary anchor rotary drilling into the ground under the ground in appropriate depth and ma...

    • MANUAL PROFESSIONAL STEEL WIRE ROPE CUTTER UNIVERSAL WIRE CLIPPER

      MANUAL PROFESSIONAL STEEL WIRE ROPE CUTTER UNIV...

      Product introduction  1.Used for cutting metal bars, lead wires, steel wires and wires etc. 2.Light weight. 3.Save time and labor. 4.Do not exceed the shear range. 5.The blades are manufactured from high strength special steel, heat treated to ensure a long service life. 6.The clearance between the two cutting edges is adjustable. WIRE CLIPPER TECHNICAL PARAMETERS Item number Model(Total length) Cutting Range(mm) Weight(kg) ...

    • Lifting Pole Frame Aluminum Alloy Holding Internal Suspended Gin Pole

      Lifting Pole Frame Aluminum Alloy Holding Inter...

      Product introduction During used for transmission and distribution line engineering, The Internal Suspended Aluminum Alloy Holding Pole is used for internal suspension lifting of iron tower. Adopt single-arm style, free from direction restriction, use convenience. The main material adopts right angle aluminum alloy section, rivet joint makes, portable and durable. According to the height of the lifting power tower and the lifting load weight, the internal suspended a...

    • Grip Cable Socks Mesh Cable Net Sleeve Conductor Mesh Socks Joint

      Grip Cable Socks Mesh Cable Net Sleeve Conducto...

      Product introduction As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip. The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire. Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diameter, traction load and use environment. When paying off ...